|
DS21Q43A Quad E1 Framer www.dalsemi.com FEATURES § § § § § Four E1 (CEPT or PCM-30) /ISDN-PRI framing transceivers All four framers are fully independent; transmit and receive sections of each framer are fully independent Frames to FAS, CAS, CCS, and CRC4 formats 8-bit parallel control port th
DS21348/Q348 3.3V E1/T1/J1 Line Interface www.maxim-ic.com FEATURES § § § § § Complete E1, T1, or J1 line interface unit (LIU) Supports both long-haul and short-haul trunks Internal software-selectable receive-side termination for 75Ω/100Ω/120W 3.3V power supply 32-bit or 128-bit crystal-l
DS2154 Enhanced E1 Single Chip Transceiver www.dalsemi.com FEATURES Complete E1(CEPT) PCM-30/ISDN-PRI transceiver functionality Onboard long- and short-haul line interface for clock/data recovery and waveshaping 32-bit or 128-bit crystal-less jitter attenuator Generates line build outs for both 120
Rev 1; 2/06 LVD SCSI 27-Line Regulator General Description The DS2129 is a triple-output voltage regulator for 27-line, low-voltage-differential (LVD) SCSI termination for SPI-2 and SPI-3 applications using LVD termination networks. The device provides reference voltages and bi
DS2181A CEPT Primary Rate Transceiver www.dalsemi.com FEATURES Single chip primary rate transceiver meets CCITT standards G.704, G.706 and G.732 Supports new CRC4-based framing standards and CAS and CCS signaling standards Simple serial interface used for device configuration and control in process
DS21Q42 Enhanced QUAD T1 FRAMER www.dalsemi.com FEATURES Four T1 DS1/ISDN–PRI/J1 framing transceivers All four framers are fully independent Each of the four framers contain dual two– frame elastic store slip buffers that can connect to asynchronous backplanes up to 8.192 MHz 8–bit parallel c
|
사이트 맵 |
0 1 2 3 4 5 6 7 8 9 A B C |
PartNumber.co.kr | 2020 | 연락처 |