|
MICROPROCESSOR SUPERVISOR CIRCUITS Jul 29, 2002 Low-Cost AC Supply The following application note discusses a low-cost solution to implement a 3V, 3.3V or 5V logic supply from AC power. It uses the MAX6330 shunt regulator which can supply up to 50mA as well as offering a reset
Application Note by Applications Staff, This application note describes the routines for the control of an X9408 or X9418 digitally controllable potentiometer. The X9408/X9418 devices have a variety of different instructions that provide flexibility to the designer. Additionall
AN1116 APPLICATION NOTE Changing from the ST95P08 to the M95080 in Your Application Using a Simple Software Recognition Method The members of the new M95xxx, SPI serial-bus, EEPROM chips offer features that were not available with the ST95xxx family. Table 1 summarizes the main differences between
® AN1115 APPLICATION NOTE ST52x301 FOR STEPPER MOTORS FUZZY CONTROL Authors: G. Grasso, M. Lo Presti 1. INTRODUCTION This application note is intended to explain how to control a stepper motor by using ST52x301 Fuzzy Microntroller. Stepper Motors are well known in position controls field applica
Application Note by Applications Staff, September 1998 Description The following code demonstrates how Xicor's CPU Supervisors with EEPROM can be interfaced to the 68HC11 microcontroller when connected as shown in Figure 1. The circuit uses the 68HC11’s built-in SPI port with the PD4/SCK pin conne
|
사이트 맵 |
0 1 2 3 4 5 6 7 8 9 A B C |
PartNumber.co.kr | 2020 | 연락처 |