AN1111C 전자부품 데이터시트

AN1116 APPLICATION NOTE Changing from the ST95P08 to the M95080 in Your Application Using a Simple Software Recognition Method The members of the new M95xxx, SPI serial-bus, EEPROM chips offer features that were not available with the ST95xxx family. Table 1 summarizes the main differences between

® AN1115 APPLICATION NOTE ST52x301 FOR STEPPER MOTORS FUZZY CONTROL Authors: G. Grasso, M. Lo Presti 1. INTRODUCTION This application note is intended to explain how to control a stepper motor by using ST52x301 Fuzzy Microntroller. Stepper Motors are well known in position controls field applica

Application Note by Applications Staff, September 1998 Description The following code demonstrates how Xicor's CPU Supervisors with EEPROM can be interfaced to the 68HC11 microcontroller when connected as shown in Figure 1. The circuit uses the 68HC11’s built-in SPI port with the PD4/SCK pin conne

AN1118 APPLICATION NOTE FLASH+: The End of the Emulation Compromise Designers are constantly under pressure to reduce the size of printed circuit boards, and are frequently faced with the EEPROM emulation dilemma: in a system that requires both Flash and EEPROM memory functions, is it necessary to

AN1113 APPLICATION NOTE Brushless Motor Fuzzy Control by using ST52x301 Authors: G. Grasso, M. Di Guardo INTRODUCTION Brushless DC motors (BLDC) are becoming widely used in the field of control motors. These kind of synchronous motors are used as servo drives in applications su