|
ON Semiconductor |
1PMT5.0AT1/T3 Series
Zener Transient
Voltage Suppressor
POWERMITE® Package
The 1PMT5.0AT1/T3 Series is designed to protect voltage
sensitive components from high voltage, high energy transients.
Excellent clamping capability, high surge capability, low Zener
impedance and fast response time. The advanced packaging
technique provides for a highly efficient micro miniature, space
saving surface mount with its unique heatsink design. The
POWERMITE has the same thermal performance as the SMA while
being 50% smaller in footprint area, and delivering one of the lowest
height profiles (1.1 mm) in the industry. Because of its small size, it
is ideal for use in cellular phones, portable devices, business
machines, power supplies and many other industrial/consumer
applications.
Specification Features:
• Stand−off Voltage: 5.0 V − 58 V
• Peak Power − 200 W @ 1 ms (1PMT5.0A − 1PMT36A)
− 175 W @ 1 ms (1PMT40A − 1PMT58A)
• Maximum Clamp Voltage @ Peak Pulse Current
• Low Leakage
• Response Time is Typically < 1 ns
• ESD Rating of Class 3 (> 16 kV) per Human Body Model
• Low Profile − Maximum Height of 1.1 mm
• Integral Heatsink/Locking Tabs
• Full Metallic Bottom Eliminates Flux Entrapment
• Small Footprint − Footprint Area of 8.45 mm2
• POWERMITE is JEDEC Registered as DO−216AA
• Lead Orientation in Tape: Cathode (Short) Lead to Sprocket Holes
• Cathode Indicated by Polarity Band
• Pb−Free Packages are Available
Mechanical Characteristics:
CASE: Void-free, transfer-molded, thermosetting plastic
FINISH: All external surfaces are corrosion resistant and leads are
readily solderable
MOUNTING POSITION: Any
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:
260°C for 10 Seconds
© Semiconductor Components Industries, LLC, 2005
July, 2005 − Rev. 9
1
http://onsemi.com
PLASTIC SURFACE MOUNT
ZENER OVERVOLTAGE
TRANSIENT SUPPRESSOR
5 − 58 V
200 W PEAK POWER
12
1: CATHODE
2: ANODE
1 POWERMITE
CASE 457
PLASTIC
2
MARKING DIAGRAM
1
CATHODE
M
MxxG
2
ANODE
M = Date Code
Mxx = Specific Device Code
(See Table on Page 3)
G = Pb−Free Package
ORDERING INFORMATION
Device
1PMTxxAT1
Package
Shipping†
POWERMITE 3,000/Tape & Reel
1PMTxxAT1G POWERMITE 3,000/Tape & Reel
(Pb−Free)
1PMTxxAT3 POWERMITE 12,000/Tape & Reel
1PMTxxAT3G POWERMITE 12,000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Publication Order Number:
1PMT5.0AT3/D
1PMT5.0AT1/T3 Series
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Maximum Ppk Dissipation, (PW−10/1000 ms) (Note 1) (1PMT5.0A − 1PMT36A)
Ppk 200
W
Maximum Ppk Dissipation, (PW−10/1000 ms) (Note 1) (1PMT40A − 1PMT58A)
Ppk 175
W
Maximum Ppk Dissipation, (PW−8/20 ms) (Note 1)
Ppk 1000
W
DC Power Dissipation @ TA = 25°C (Note 2)
Derate above 25°C
Thermal Resistance, Junction−to−Ambient
°PD°
RqJA
500 °mW
4.0 mW/°C
248 °C/W
Thermal Resistance, Junction−to−Lead (Anode)
RqJanode
35
°C/W
Maximum DC Power Dissipation (Note 3)
Thermal Resistance, Junction−to−Tab (Cathode)
°PD°
RqJcathode
3.2
23
W
°C/W
Operating and Storage Temperature Range
TJ, Tstg
−55 to +150
°C
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
1. Nonrepetitive current pulse at TA = 25°C.
2. Mounted with recommended minimum pad size, DC board FR−4.
3. At Tab (Cathode) temperature, Ttab = 75°C
ELECTRICAL CHARACTERISTICS (TA = 25°C unless
otherwise noted, VF = 3.5 V Max. @ IF (Note 4) = 35 A)
Symbol
Parameter
IPP
VC
VRWM
IR
VBR
IT
IF
VF
Maximum Reverse Peak Pulse Current
Clamping Voltage @ IPP
Working Peak Reverse Voltage
Maximum Reverse Leakage Current @ VRWM
Breakdown Voltage @ IT
Test Current
Forward Current
Forward Voltage @ IF
I
IF
VC VBR VRWM
IIRT VF
V
IPP
Uni−Directional TVS
http://onsemi.com
2
|