|
|
PDF A201SN01-V6 Data sheet ( Hoja de datos )
| Número de pieza | A201SN01-V6 | |
| Descripción | COLOR TFT-LCD TV MODULE | |
| Fabricantes | AUO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de A201SN01-V6 (archivo pdf) en la parte inferior de esta página. Total 17 Páginas | ||
|
No Preview Available !
Specifications Approval Sheet
Product Description: 20.1” COLOR TFT-LCD TV MODULE
AU Model Name: A201SN01 V6
Customer Part No:
Customer Signature
Date AU
Approved By:
Reviewed By:
Prepared By:
2004/01/14
Please return one copy with your signature and comments for our
confirmation.
AU Optronics Corporation
Tel: +886-3-563-2899
Fax: +886-3-563-1590
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
1 page  
A201SN01 V.6.01
Contents:
A. Physical specifications
B. Electrical specifications
1. Pin assignment.
2.Absolute maximum ratings
3. Electrical characteristics
a. Typical operating conditions.
b. Display color v. s. input data signals
c. Input signal timing
d. Display position
e. Backlight unit
C. Optical specifications
D. Reliability test items
E. Display quality
F. Handling precaution
G. Packing
Appendix:
Fig.1 LCM outline dimensions
Fig.2 Timing chart
Spec. No.
TVPM-A201SN01 V6
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
5/17
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
5 Page 
A201SN01 V.6.01
Spec. No.
TVPM-A201SN01 V6
d. Display position
D( 1,1 )
D( 2,1 )
D( 1,2 )
...
D( 1,Y )
...
D( 1,599 )
D( 2,2 )
D( 2,Y )
D( 2,599 )
D( 1,600 ) D( 2,600 )
……
……
……
……
……
……
……
D( X,1 )
D( X,2 )
...
D( X,Y )
...
D( X,599 )
D( X,600 )
……
……
……
……
……
……
……
D( 799,1 ) D( 800,1 )
D( 799,2 )
...
D( 800,2 )
...
D( 799,Y )
...
D( 800,Y )
...
D( 799,599) D( 800,599 )
D( 799,600) D( 800,600)
e.Backlight unit
The backlight system is an edge-lighting type with a CCFT(Cold Cathode Fluorescent Tube).
The characteristics of a single lamp are shown in the following tables.
Parameter
Symbol
Min.
Typ.
Max.
Unit Remark
Lamp voltage
VL 720 800
880
Vrms
Note 1
Lamp current
IL 4 5.5
7 mArms Note 1
Power consumption
Lamp starting voltage
PL
VS
- 4.4x6
-
W Note 2
- - 1500(T=0℃)
Vrms
Note 3
- - 1150(T=25℃)
Frequency
FL 40 52
60 KHZ Note 4
Lamp life time
LL 50000
-
- Hr Note 1, 5
Note 1: T= 25℃
Note 2: Inverter should be designed with the characteristic of lamp. When you are designing
the inverter, the output voltage of the inverter should comply with the following
conditions.
(1). The area under the positive and negative cycles of the waveform of the lamp
current and lamp voltage should be area symmetric (the symmetric ratio should
be larger than 90%).
(2). There should not be any spikes in the waveform.
(3). The waveform should be sine wave as possible.
(4). Lamp current should not exceed the maximum value within the operating
temperature (It is prohibited to over the maximum lamp current even if operated
in the non-guaranteed temperature). When lamp current over the maximum
value for a long time, it may cause fire. Therefore, it is recommend that the
inverter should have the current limited circuit.
Note 3: The inverter open voltage should be designed larger than the lamp starting voltage at
T=0oC, otherwise backlight may be blinking for a moment after turning on or not be
able to turn on. The open voltage should be measured after ballast capacitor. If an
inverter has shutdown function it should keep its open voltage for longer than 1
second even if lamp connector is open.
Note 4: Lamp frequency may produce interference with horizontal synchronous frequency
and this may cause line flow on the display. Therefore lamp frequency shall be
detached from the horizontal synchronous frequency and its harmonics as far as
possible in order to avoid interference.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
11/17
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
11 Page | ||
| Páginas | Total 17 Páginas | |
| PDF Descargar | [ Datasheet A201SN01-V6.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| A201SN01-V0 | LCD Module | AUO |
| A201SN01-V3 | LCD Module | AUO |
| A201SN01-V6 | COLOR TFT-LCD TV MODULE | AUO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |