|
NXP Semiconductors |
www.DataSheet4U.com
BLC6G10-160; BLC6G10LS-160
UHF power LDMOS transistor
Rev. 01 — 12 May 2006
Objective data sheet
1. Product profile
1.1 General description
160 W LDMOS power transistor for base station applications at frequencies from
800 MHz to 1000 MHz.
Table 1: Typical performance
Typical RF performance at Tcase = 25 °C in a class-AB production test circuit.
Mode of operation
f
VDS
PL(AV)
Gp
ηD
(MHz)
(V) (W)
(dB) (%)
2-carrier W-CDMA
920 to 960
32 32
23 28
ACPR
(dBc)
−40[1]
[1] Test signal: 3GPP; test model 1; 64 DPCH; PAR = 7.5 dB at 0.01 % probability on CCDF per carrier; carrier
spacing 5 MHz
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport and handling.
1.2 Features
I Typical 2-carrier W-CDMA performance at frequencies of 920 MHz and 960 MHz, a
supply voltage of 32 V and an IDq of 1200 mA:
N Average output power = 32 W
N Power gain = 23 dB
N Efficiency = 28 %
N ACPR = −40 dBc
I Easy power control
I Integrated ESD protection
I Excellent ruggedness
I High efficiency
I Excellent thermal stability
I Designed for broadband operation (800 MHz to 1000 MHz)
I Internally matched for ease of use
1.3 Applications
I RF power amplifiers for GSM, GSM EDGE, W-CDMA and CDMA base stations and
multi carrier applications in the 800 MHz to 1000 MHz frequency range.
Philips Semiconductors
BLC6G10-160; BLC6G10LS-160
UHF power LDMOS transistor
2. Pinning information
Table 2: Pinning
Pin Description
BLC6G10-160 (SOT895-1)
1 drain
2 gate
3 source
BLC6G10LS-160 (SOT896-1)
1 drain
2 gate
3 source
[1] Connected to flange
3. Ordering information
Simplified outline Symbol
11
3
[1]
22
3
sym112
1
3
[1]
2
1
2
3
sym112
Table 3: Ordering information
Type number Package
Name Description
Version
BLC6G10-160 -
plastic flanged cavity package; 2 mounting slots; 2 leads SOT895-1
BLC6G10LS-160 -
plastic earless flanged cavity package; 2 leads
SOT896-1
4. Limiting values
Table 4: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Conditions
VDS drain-source voltage
VGS gate-source voltage
ID drain current
Tstg storage temperature
Tj junction temperature
Min Max Unit
- 65 V
−0.5 +13 V
- <tbd> A
−65 +150 °C
- 200 °C
BLC6G10-160_6G10LS-160_1
Objective data sheet
Rev. 01 — 12 May 2006
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
2 of 9
|