|
Motorola Inc |
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
The RF Line
NPN Silicon
High-Frequency Transistor
Designed primarily for use in high–gain, low–noise amplifier, oscillator and
mixer applications. Packaged for thick or thin film circuits using surface mount
components.
• T1 suffix indicates tape and reel packaging of 3,000 units per reel.
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Collector–Emitter Voltage
Collector–Base Voltage
Maximum Junction Temperature
THERMAL CHARACTERISTICS
Characteristic
VCEO
VCBO
TJmax
Symbol
15
25
150
Max
Vdc
Vdc
°C
Unit
Total Device Dissipation, TA = 25°C
Derate above 25°C (1)
PD 350 mW
2.8 mW/°C
Storage Temperature
Thermal Resistance Junction to Ambient (1)
DEVICE MARKING
Tstg
RθJA
– 55 to +150
357
°C
°C/W
BFS17LT1 = E1
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted.)
Characteristic
Symbol
OFF CHARACTERISTICS
Collector–Emitter Breakdown Voltage (IC = 10 mA)
Collector–Base Breakdown Voltage (IC = 100 µA)
Collector Cutoff Current (VCE = 10 V)
Collector Cutoff Current (VCB = 10 V)
Emitter Cutoff Current (VEB = 4 V)
ON CHARACTERISTICS
V(BR)CEO
V(BR)CBO
ICEO
ICBO
IEBO
DC Current Gain
(IC = 2 mA, VCE = 1 V)
(IC = 25 mA, VCE = 1 V)
Collector–Emitter Saturation Voltage
(IC = 10 mA, IB = 1 mA)
Base–Emitter Saturation Voltage
(IC = 10 mA, IB = 1 mA)
SMALL–SIGNAL CHARACTERISTICS
hFE
VCE(sat)
VBE(sat)
Current–Gain — Bandwidth Product
(IC = 2 mA, VCE = 5 V, f = 500 MHz)
(IC = 25 mA, VCE = 5 V, f = 500 MHz)
Output Capacitance (VCB = 10 V, f = 1 MHz)
Noise Figure (IC = 2 mA, VCE = 5 V, RS = 50 Ω, f = 30 MHz)
NOTE:
1. Package mounted on 99.5% alumina 10 x 8 x 0.6 mm.
fT
CCB
NF
Min
15
25
—
—
—
20
20
—
—
—
—
—
—
REV 7
©MMOotoTrOolaR, OIncL.A19R95F DEVICE DATA
Order this document
by BFS17LT1/D
BFS17LT1
RF TRANSISTOR
NPN SILICON
CASE 318–08, STYLE 6
SOT–23
LOW PROFILE
(TO–236AA/AB)
Typ Max Unit
— — Vdc
— — Vdc
— 25 nA
— 25 nA
— 100 µA
—
— 150
——
— 0.4 V
—1 V
GHz
1—
1.3 —
1 — pF
5 — dB
BFS17LT1
1
PACKAGE DIMENSIONS
A
L
3
BS
12
VG
C
DH
K
J
CASE 318–08
ISSUE AE
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. MAXIUMUM LEAD THICKNESS INCLUDES LEAD
FINISH THICKNESS. MINIMUM LEAD THICKNESS
IS THE MINIMUM THICKNESS OF BASE
MATERIAL.
INCHES
DIM MIN MAX
A 0.1102 0.1197
B 0.0472 0.0551
C 0.0350 0.0440
D 0.0150 0.0200
G 0.0701 0.0807
H 0.0005 0.0040
J 0.0034 0.0070
K 0.0140 0.0285
L 0.0350 0.0401
S 0.0830 0.1039
V 0.0177 0.0236
MILLIMETERS
MIN MAX
2.80 3.04
1.20 1.40
0.89 1.11
0.37 0.50
1.78 2.04
0.013 0.100
0.085 0.177
0.35 0.69
0.89 1.02
2.10 2.64
0.45 0.60
STYLE 6:
PIN 1. BASE
2. EMITTER
3. COLLECTOR
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
How to reach us:
USA / EUROPE: Motorola Literature Distribution;
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447
JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki,
6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315
MFAX: [email protected] – TOUCHTONE (602) 244–6609 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
INTERNET: http://Design–NET.com
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
BFS17LT1
2
◊
*BFS17LT1/D*MOTOROLA RF DEVIBCFESD17ALTTA1/D
|