|
|
Número de pieza | WT5701 | |
Descripción | Low Power Capacitive Touch Key Sensor | |
Fabricantes | Weltrend | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de WT5701 (archivo pdf) en la parte inferior de esta página. Total 27 Páginas | ||
No Preview Available ! 偉詮電子股份有限公司
Weltrend Semiconductor, Inc.
WT5701
Low Power
Capacitive Touch Key Sensor
Data Sheet
Rev. 1.00
Dec. 17, 2009
Copyright Notice
This data sheet is copyrighted by Weltrend Semiconductor, Inc. Do not reproduce, transform to any other format,
or send/transmit any part of this documentation without the express written permission of Weltrend Semiconductor,
Inc.
Disclaimers
Right to make change –
This document provides technical information for user. Weltrend Semiconductor, Inc. reserves the right to make
change without further notice to any products herein.
新竹縣科學工業園區工業東九路24號2樓
2F, No. 24, Industry E. 9th RD., Science-Based Industrial Park, Hsin-Chu, Taiwan
TEL:886-3-5780241 FAX:886-3-5794278.5770419
Email:[email protected]
1 page eltrend
WT5701 v1.00
Low Power Capacitive Touch Key Sensor
One PWM could output via OUT[11:0]
Add external reset pin, active low
Auto-reset(calibration) function(default disable). If key touch over 190sec, chip will auto reset calibration
function automatic.
Copyright∏ 2008 Weltrend Semiconductor, Inc. All Rights Reserved.
Weltrend reserves right to modify all information contained in this document without notice.
Page 5
5 Page eltrend
WT5701 v1.00
Low Power Capacitive Touch Key Sensor
4.2. System control register
Index Default R/W Bit
Name
00 20 R/W 7-6 Reserved
5 SLOW_MODE_N
W 4 RST_CALB
3 ACT_INT_LVL
2 ACT_OUT_LVL
1 CTL_SLT
0 PWR_DN
Description
RC oscillator frequency adjust
1: Normal mode
0: Slow down mode
1: Reset calibration block
0: normal mode
Active interrupt level
1: High active
0: Low active
Active output level
1: High active
0: Low active
Control signal selection
1: From register setting
0: From input pin
1: Power down oscillator
0: Normal mode
(a) If MUC sends I2C command to set CTL_SLT, the function of control input pin will be disable.
Control signals include: SENSEn[2:0], WIN_CTL, MTM, PWMO_EN, PWMO_SLT, SLOW_MODE_N
(b) PWR_DN: MCU sends I2C command to enable/disable power down mode(sleep mode).
(c) After wake up, MCU must set RST_CALB=1 to reset calibration block and get new & correct calibration data.
Copyright∏ 2008 Weltrend Semiconductor, Inc. All Rights Reserved.
Weltrend reserves right to modify all information contained in this document without notice.
Page 11
11 Page |
Páginas | Total 27 Páginas | |
PDF Descargar | [ Datasheet WT5701.PDF ] |
Número de pieza | Descripción | Fabricantes |
WT5701 | Low Power Capacitive Touch Key Sensor | Weltrend |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |