|
OPTEK |
Photologic® Reflective Object Sensor
OPB715Z, OPB716Z, OPB717Z, OPB718Z
Features:
• Focused for maximum sensitivity
• .5” (12.700 mm) sensing distance
• Panel mount
• Choice of output configurations
• 18” (457.200 mm) minimum wire length
Product Photo Here
Description:
The OPB715Z series reflective assembly consists of a GaALAs LED and a Photologic® sensor enclosed in an IR
transmissive housing. The sensor is characterized to detect paper at 0.5” (12.7 mm). The sensor has a wide
operating distance range and is capable of detecting reflective objects at other distances. The reflective distance
depends on the reflectance materials.
The sensor’s panel-mount plastic housing shields stray light and is terminated with 18” (457 mm) UL approved 26
AWG wire leads. The LED is current limited internally for design convenience. Its output can be specified as
either TTL Totem-Pole or TLL Open-Collector. Inverted output options are available for either output configuration.
Applications:
• Focused for maximum sensitivity
• 0.5” (12.700 mm) sensing distance
• Panel mount
• Choice of output configurations
• 18” (457.200 mm) minimum wire length
Part
Number
OPB715Z
OPB716Z
OPB717Z
OPB718Z
LED Peak
Wavelength
890 nm
Sensor
Photologic®
Totem-Pole
Open-Collector
Inv-Totem-Pole
Inv-Open-Collector
Reflection
Distance
Inch (mm)
0.50"
Lead
Length /
Spacing
18" / 26
AWG Wire
OPB715 Buffered Totem-Pole
VCC
AMP
OUT
OPB716 Buffered Open Collector
VCC
AMP
OUT
GND
OPB717 Inverted Totem-Pole
VCC
GND
OPB718 Inverted Open-Collector
VCC
[ MILLIMETERS]
DIMENSIONS ARE IN:
INCHES
AMP
OUT
AMP
OUT
GND
GND
Color-Pin #
Orange
White
Violet
Description
VCC
Output
Ground
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.2 1/07
Page 1 of 3
Photologic® Reflective Object Sensor
OPB715Z, OPB716Z, OPB717Z, OPB718Z
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Storage & Operating Temperature Range
Supply Voltage, VCC (not to exceed 2 seconds)
Power Dissipation(1)
Output Voltage (Open-Collector only)
-40° C to +85° C
10 V
300 mW
35 V
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
VCC Operating Supply Voltage
ICCL Low-Level Supply Current:
ICCH High-Level Supply Current
High-Level Output Current
IOH OPB716
OPB718
Short Circuit Output Current
IOS OPB715
OPB717
Low-Level Output Voltage
OPB715
VOL OPB716
OPB717
OPB718
MIN
4.75
-
-
TYP
-
-
-
MAX UNITS
TEST CONDITIONS
5.25 V
-
30 mA VCC = 5.0 V, output open
50 mA VCC = 5.0 V, output open
- - 100 µA VCC = 4.5 V, VCH = 5 V(3)
- - 100 µA VCC = 4.5 V, VCH = 5 V(4)
- - 100 µA VCC = 5.0 V, VCH = 5 V
- - 100 µA
-
-
-
-
0.4
0.4
V
V
VCC = 5.0 V, IOL = 12.8 mA(4)
-
-
-
-
0.4
0.4
V VCC = 5.0 V, IOL = 12.8 mA(3)
Notes:
(1)
(2)
(3)
(4)
Derate linearly at 5.0 mW / °C above 25° C.
Terminating wire is 7 strand, 26 AWG, UL 1429.
Tested at d = 0.55” (12.7 mm) from a 90% diffuse, white test surface. Reference: Eastman Kodak Catalog #E 152 7795.
No reflective surface.
TOP
0.00
Typical - Trigger Points vs Displacement
From Both Sides
0.50
0.40
Turn-ON
Turn-OFF
0.30
0.20
0.10
Typical - Trigger Points vs Displacement
From Top & Bottom
0.15
Turn-ON
0.13
0.10
0.08
Turn-OFF
0.05
0.03
0.00
0.00
Turn-ON
Turn-OFF
-0.10
-0.20
-0.30
-0.40
Turn-OFF
Turn-ON
-0.03
-0.05
-0.08
-0.10
-0.13
-0.50
0.10 0.20 0.30 0.40 0.50 0.60 0.70
Distance (inches)
0.00 0.10 0.20 0.30 0.40 0.50 0.60
Distance (inches)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
-0.15
0.70
Issue A.2 1/07
Page 2 of 3
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
|