|
|
PDF KM110BH2430 Data sheet ( Hoja de datos )
| Número de pieza | KM110BH2430 | |
| Descripción | 30 and 70 angle sensor hybrids | |
| Fabricantes | NXP Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de KM110BH2430 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
DISCRETE SEMICONDUCTORS
DATA SHEET
KM110BH/2430; KM110BH/2470
30° and 70° angle sensor hybrids
Preliminary specification
Supersedes data of November 1994
File under Discrete Semiconductors, SC17
1996 Nov 08
1 page  
Philips Semiconductors
30° and 70° angle sensor hybrids
Preliminary specification
KM110BH/2430;
KM110BH/2470
Notes to the characteristics
1. Refer to Fig.3. The magnetic field Hext = 100 kA/m can be achieved using the magnets listed in Table 1.
2. The sensitivity will change slightly with +0.33% per 10% magnetic field increase if Hext deviates from 100 kA/m.
3. Deviation from best straight line in angle range.
4. Difference in output signal (expressed in degrees) between two zero point (α = 0°) measurements, in which the zero
point is approached from the same side of the measuring range (e.g. cycle: +15° ⇒ 0° ⇒ +15° ⇒ 0°).
5. The smallest detectable change of angle ∆α for α = 0° (cycle: 0° ⇒ ∆α).
6. As note 4, but with the zero point being approached from the upper end and lower end of the measuring range
respectively (cycle: +15° ⇒ 0° ⇒ −15° ⇒ 0°).
handbook, full pagewidth
S
N
d
12
α
3
MBD900
Fig.3 Optimum magnet position relative to the sensor module.
1996 Nov 08
5
5 Page 
Philips Semiconductors
30° and 70° angle sensor hybrids
Preliminary specification
KM110BH/2430;
KM110BH/2470
DEFINITIONS
Data Sheet Status
Objective specification
Preliminary specification
Product specification
This data sheet contains target or goal specifications for product development.
This data sheet contains preliminary data; supplementary data may be published later.
This data sheet contains final product specifications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specification
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
1996 Nov 08
11
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet KM110BH2430.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| KM110BH2430 | 30 and 70 angle sensor hybrids | NXP Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |