파트넘버.co.kr TQ2SA-4.5V 데이터시트 PDF


TQ2SA-4.5V 반도체 회로 부품 판매점

SMD RELAYS



Panasonic 로고
Panasonic
TQ2SA-4.5V 데이터시트, 핀배열, 회로
TQ SMD
TESTING
LOW-PROFILE
TQ SMD RELAYSSURFACE-MOUNT RELAY
14
.551
9
.354
5.6
.220
mm inch
RoHS Directive compatibility information
http://www.nais-e.com/
FEATURES
• Low-profile: 6 mm .236 inch
(Tape height: max. 6.5 mm .256 inch)
• Tape and reel package is available as standard packing style
• Surge withstand between contacts and coil: 2,500 V
• Breakdown voltage between contacts and coil: 1,500 V
• Capacity: 2 A
• High sensitivity:
2 Form C; 140 mW power consumption (Single side stable type)
SPECIFICATIONS
Contact
Arrangement
2 Form C
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
75 m
Contact material
Au-clad AgNi type
Nominal switching capacity
(resistive load)
2 A 30 V DC,
0.5 A 125 V AC
Rating
Max. switching power
(resistive load)
Max. switching voltage
60 W, 62.5 VA
220 V DC, 125 V AC
Max. switching current
2A
Min. switching capacity
(Reference value)#1
10 µA 10 mV DC
Nominal
operating
power
Single side stable
1 coil latching
140 mW (1.5 to 12 V DC)
200 mW (24 V DC)
300 mW (48 V DC)
70 mW (1.5 to 12 V DC)
100 mW (24 V DC)
2 coil latching
140 mW (1.5 to 12 V DC)
200 mW (24 V DC)
Mechanical (at 180 cpm)
108
Expected
life (min.
operations)
Electrical
(at 20 cpm)
2 A 30 V DC
resistive
1 A 30 V DC
resistive
105
2×105
0.5 A 125 V AC
resistive
105
Note:
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load. (SX relays are available for low level load switching [10V DC, 10mA
max. level])
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as “Initial breakdown voltage” section.
*2 By resistive method, nominal voltage applied to the coil; contact carrying current:
2 A.
*3 Nominal voltage applied to the coil, excluding contact bounce time.
*4 Nominal voltage applied to the coil, excluding contact bounce time without diode.
*5 Half-wave pulse of sine wave: 6 ms; detection time: 10 µs
*6 Half-wave pulse of sine wave: 6 ms
*7 Detection time: 10 µs
*8 Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT .
Characteristics
Initial insulation resistance*1
Initial
breakdown
voltage
Between open
contacts
Between contact sets
Between contact and
coil
Initial surge
voltage
Between open
contacts
(10×160 µs)
Between contacts and
coil (2×10 µs)
Temperature rise*2 (at 20°C)
Operate time [Set time]*3 (at 20°C)
Release time [Reset time]*4
(at 20°C)
Shock resistance
Functional*5
Destructive*6
Functional*7
Vibration resistance
Destructive
Conditions for
operation, transport
and storage*8
(Not freezing and
condensing at low
temperature)
Unit weight
Ambient
temperature
Humidity
Min. 1,000 M(at 500 V DC)
1,000 Vrms for 1 min.
(Detection current: 10 mA)
1,500 Vrms for 1 min.
(Detection current: 10 mA)
1,500 Vrms for 1 min.
(Detection current: 10 mA)
1,500 V (FCC Part 68)
2,500 V (Telcordia)
Max. 50°C
Max. 4 ms [Max. 4 ms]
Max. 4 ms [Max. 4 ms]
Min. 750 m/s2 {75 G}
Min. 1,000 m/s2 {100 G}
200 m/s2 {20G}, 10 to 55 Hz
at double amplitude of 3.3 mm
294 m/s2 {30G}, 10 to 55 Hz
at double amplitude of 5 mm
–40°C to +85°C*3
–40°F to +185°F
5 to 85% R.H.
Approx. 2 g .071 oz
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.


TQ2SA-4.5V 데이터시트, 핀배열, 회로
ORDERING INFORMATION
Ex. TQ 2 SA L 3V Z
TQ SMD
Contact arrangement
Surface-mount availability
Operating function
Coil voltage (DC)
Packing style
2: 2 Form C
SA: Standard surface-mount
SA: terminal type
SL : High connection reliability
SA: surface-mount terminal type
SS: Space saving surface-
SA: mount terminal type
Nil: Single side stable
L: 1 coil latching
L2: 2 coil latching
1.5, 3, 4.5, 5, 6,
9, 12, 24, 48* V
Nil: Tube packing
Z: Tape and reel packing (pick-
ed from the 6/7/8/9/10-pin side)
*48 V coil type: Single side stable only
Notes: 1. Tape and reel (picked from 1/2/3/4/5-pin side) is also available by request. Part No. suffix “-X” is needed when ordering. (ex.) TQ2SA-3V-X
2. Tape and reel packing symbol “-Z” or “-X” are not marked on the relay.
TYPES
1. Single side stable
Part No.
Nominal
voltage,
V DC
TQ2S-1.5 V
TQ2S-3 V
TQ2S-4.5 V
TQ2S-5 V
TQ2S-6 V
TQ2S-9 V
TQ2S-12 V
TQ2S-24 V
TQ2S-48 V
1.5
3
4.5
5
6
9
12
24
48
Pick-up voltage,
V DC (max.)
1.13
2.25
3.38
3.75
4.5
6.75
9
18
36
Drop-out
voltage,
V DC (min.)
0.15
0.3
0.45
0.5
0.6
0.9
1.2
2.4
4.8
Nominal
operating
current,
mA (±10%)
93.8
46.7
31
28.1
23.3
15.5
11.7
8.3
6.3
Coil resistance,
(±10%)
Nominal
operating power,
mW
Max. allowable
voltage,
V DC
16
64.3
145
178
257
579
1,028
2,880
7,680
140
140
140
140
140
140
140
200
300
2.2
4.5
6.7
7.5
9
13.5
18
36
57.6
2. 1 coil latching
Part No.
TQ2S-L-1.5 V
TQ2S-L-3 V
TQ2S-L-4.5 V
TQ2S-L-5 V
TQ2S-L-6 V
TQ2S-L-9 V
TQ2S-L-12 V
TQ2S-L-24 V
Nominal
voltage,
V DC
1.5
3
4.5
5
6
9
12
24
Set voltage,
V DC (max.)
1.13
2.25
3.38
3.75
4.5
6.75
9
18
Reset voltage,
V DC (max.)
1.13
2.25
3.38
3.75
4.5
6.75
9
18
Nominal
operating
current,
mA (±10%)
46.9
23.3
15.6
14
11.7
7.8
5.8
4.2
Coil resistance,
(±10%)
Nominal
operating power,
mW
Max. allowable
voltage,
V DC
32
128.6
289.3
357
514
1,157
2,057
5,760
70
70
70
70
70
70
70
100
2.2
4.5
6.7
7.5
9
13.5
18
36
3. 2 coil latching
Part No.
Nominal
voltage,
V DC
Set voltage,
V DC (max.)
Reset voltage,
V DC (max.)
Nominal
operating
current,
mA (±10%)
Coil resistance,
(±10%)
Nominal
operating power,
mW
TQ2S-L2-1.5 V
1.5
1.13 1.13 93.8
16
140
TQ2S-L2-3 V
3
2.25 2.25 46.7 64.3 140
TQ2S-L2-4.5 V
4.5
3.38 3.38
31
145 140
TQ2S-L2-5 V
5
3.75 3.75 28.1 178 140
TQ2S-L2-6 V
6
4.5 4.5 23.3 257 140
TQ2S-L2-9 V
9
6.75 6.75 15.5 579 140
TQ2S-L2-12 V
12
9
9 11.7 1,028 140
TQ2S-L2-24 V
24
18
18
8.3 2,880 200
: For each surface-mounted terminal variation, input the following letter.
SA type: A, SL type: L, SS type: S
Notes: 1. Specified value of the pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.
2. Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
Tape and reel: 500 pcs.; Case: 1,000 pcs.
3. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
Max. allowable
voltage,
V DC
2.2
4.5
6.7
7.5
9
13.5
18
36
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.




PDF 파일 내의 페이지 : 총 5 페이지

제조업체: Panasonic

( panasonic )

TQ2SA-4.5V relay

데이터시트 다운로드
:

[ TQ2SA-4.5V.PDF ]

[ TQ2SA-4.5V 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


TQ2SA-4.5V

SMD RELAYS - Panasonic