|
|
PDF DK1A Data sheet ( Hoja de datos )
| Número de pieza | DK1A | |
| Descripción | MINIATURE POWER RELAY | |
| Fabricantes | Nais | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DK1A (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
VDE
DK-RELAYSMINIATURE POWER RELAY
20
.787
12.5
.492
10
.394
1a
20
.787
15
.591
10
.394
1a1b
mm inch
FEATURES
• Large capacity in small size: 10 A 250 V AC (1a)
• High sensitivity: 200 mW nominal operating power
• High breakdown voltage 4,000 Vrms between contacts and
coil 1,000 Vrms between open contacts Meeting FCC Part 68
• Sealed construction
• Latching types available
SPECIFICATIONS
Contact
Characteristics
Arrangement
Initial contact resistance, max.
(By voltage drop 6 V DC 1A)
Contact material
Nominal
switching capacity
Rating
(resistive)
Max. switching
power
Max. switching
voltage
Max. switching
current
Expected
life (min.
operations)
Mechanical
Electrical
(resistive)
Coil
Nominal operating power
1 Form A
2 Form A,
1 Form A
1 Form B
30 mΩ
Gold flash over silver alloy
10 A 250 V AC
10 A 30 V DC
8 A 250 V AC
8 A 30 V DC
Max. operating speed
Initial insulation resistance*1
Initial
breakdown
voltage*2
Between open
contacts
Between contacts
and coil
Surge voltage between coil and
contact*3
300 W, 2,500 VA
250 V AC,
30 V DC
240 W, 2,000 VA
Operate time*4
(at nominal voltage)
250 V AC,
Release time (without diode)*4
3D0 aVtDaCSheet4U.c(oatmnominal voltage)
10 A
8A
5×107
105
(10 A 250 V AC,
10 A 30 V DC)
105
(8 A 250 V AC,
8 A 30 V DC)
200 mW
Temperature rise
(at nominal voltage)
Shock
Functional*5
resistance Destructive*6
Vibration
resistance
Functional*7
Destructive
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as "Initial breakdown voltage" section
*2 Detection current: 10 mA
*3 Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981
*4 Excluding contact bounce time
*5 Half-wave pulse of sine wave: 11ms; detection time: 10µs
*6 Half-wave pulse of sine wave: 6ms
*7 Detection time: 10µs
*8 Refer to 5. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (Page 61).
Conditions for oper-
ation, transport and
storange*8
(Not freezing and
condensing at low
temperature)
Ambient
temp.
Humidity
Unit
weight
1 Form A
1 Form A 1 Form B,
2 Form A
20 cpm (at rated load)
Min. 1,000 mΩ (at 500 V DC)
1,000 Vrms
4,000 Vrms
Min. 10,000 V
Max. 10 ms (Approx. 5 ms)
Max. 8 ms (Approx. 3 ms) DataShee
Max. 40°C with nominal coil voltage
and at 10 A switching current
Min. 98 m/s2 {10 G}
Min. 980 m/s2 {100 G}
88.2 m/s2 {9 G}, 10 to 55 Hz
at double amplitude of 1.5 mm
176.4 m/s2 {18 G}, 10 to 55 Hz
at double amplitude of 3.0 mm
–40°C to +65°C
–40°F to +149°F
5 to 85% R.H.
Approx. 5.6 g .20 oz
Approx. 6 g .21 oz
TYPICAL
APPLICATIONS
• Switching power supply
• Power switching for various
OA equipment
• Control or driving relays for industrial
machines (robotics, numerical control
machines, etc.)
• Output relays for programmable logic
controllers, temperature controllers,
timers and so on.
• Home appliances
DataSheet4U.com
ORDERING INFORMATION
Ex. DK 1a
L2
12V
Contact arrangement
Operating function
1a: 1 Form A
2a: 2 Form A
1a1b: 1 Form A 1 Form B
Nil: Single side stable
L2: 2 coil latching
Note: Standard packing Carton: 50 pcs.; Case: 500 pcs.
UL/CSA, TÜV approved type is standard.
Coil voltage
3, 5, 6, 9, 12, 24V
239
DataSheet4 U .com
1 page  
www.DataSheet4U.com
DK relay socket
DK
TYPES AND RELAY COMPATIBILITY
Socket
Relay
1 Form A
Single side stable type
2 coil latching type
1 Form A 1 Form B Single side stable type
2 Form A
2 coil latching type
1 Form A
Single side
2 coil
stable type latching type
DK1a-PS DK1a-PSL2
— DK1a-PSL2
——
——
1 Form A 1 Form B, 2 Form A
Single side
2 coil
stable type latching type
——
——
DK2a-PS DK2a-PSL2
— DK2a-PSL2
SPECIFICATIONS
Breakdown voltage*1
Insulation resistance
Heat resistance
Max. continuous current
Remarks
*1 Detection current: 10 mA
DIMENSIONS
1 Form A type
4,000 Vrms (Except the portion between coil terminals)
Min. 1,000 mΩ (at 500 V DC)
150°C (for 1 hour)
10 A (DK1a-PS, DK1a-PSL2), 8 A (DK2a-PS, DK2a-PSL2)
1 Form A 1 Form B type, 2 Form A type
mm inch
PC board pattern (Copper-side view)
1 Form A
15±0.6
.591±.024
15±0.6
.591±.024
1.2 dia.
1 2 3 4 .047 dia.
23±0.6
.906±.024
23±0.6
.906±.024
65
2.54
.100
1 Form A 1 Form B
2.54
.100
et4U.com
13.7±0.6
.539±.024
17±0.6
.669±.024
6±0.3
.236±.012
0.3±0.1
.012±.004
2.54±0.1
.100±.004
0.8
.031
7.62±0.3 7.62±0.3
.300±.012 .300±.012
3.4±0.3
.134±.012
0.25
.010
10.16±0.3
.400±.012
17±0.6
.669±.024
6±0.3
.236±.012
13.7±0.6
.539±.024
DataSheet4U.com0.3±0.1
3.4±0.3
.012±.004
.134±.012 7.62±0.3 10.16±0.3
.300±.012 .400±.012
10.16±0.3
.400±.012
General tolerance: ±0.3 ±.012
1.2 dia.
1 2 3 4 .047 dia.
87
65
2.54
.100
2.54
.100
The above shows 2 coil latching type. No.2 and 5
terminal are eliminated on single side stable type.
Tolerance: ±0.1 ±.004
FIXING AND REMOVAL METHOD
1. Match the direction of relay
and socket.
2. Both ends of the relay are to
be secured firmly so that the
socket hooks on the top sur-
face of the relay.
3. Remove the relay, applying
force in the direction shown
below.
4. In case there is not enough
space to grasp relay with fin-
gers, use screwdrivers in the
way shown below.
GOOD
NO GOOD
NOTES
1. Phase synchronization of AC-load
switching
In case of switching the contact synchro-
nized with phase of load voltage, the life of
contact might be shorter or contact failure
might be caused. Please confirm this
matter in the actual system in this case. If
necessary, the phase control would be
recommended.
Vin
Load
voltage
Vin
Ry
Load
Load
voltage
2. Soldering should be done under the fol-
lowing conditions:
250°C 482°F within 10s
300°C 572°F within 5s
350°C 662°F within 3s
DataSheetF4Uo.cromCautions for Use, see Relay Technical Information (Page 48 to 76).
9/1/2000
All Rights Reserved, © Copyright Matsushita Electric Works,2L4td3.
Go To Online Catalog
DataSheet4 U .com
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet DK1A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DK100-B020 | DC Current transducer DK-B020/420 |  LEM |
| DK100-B10 | DC Current transducer DK-B5/10 | LEM |
| DK100-B420 | DC Current transducer DK-B020/420 | LEM |
| DK100-B5 | DC Current transducer DK-B5/10 | LEM |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |