파트넘버.co.kr T9AS5D12-xx 데이터시트 PDF


T9AS5D12-xx 반도체 회로 부품 판매점

(T9A Series) Low Cost 30 Amp PC Board or Panel Mount Relay



Siemens 로고
Siemens
T9AS5D12-xx 데이터시트, 핀배열, 회로
www.DataSheet4U.com
T9A series
Low Cost
30 Amp PC Board or
Panel Mount Relay
File E22575
File LR15734
Features
• Up to 30 amp switching in SPST and 20 amp in SPDT arrangements.
• Immersion cleanable(6), plastic sealed case available.
• Meets UL 873 and UL 508 spacing – 1/8" through air, 1/4" over surface.
• Load connections made via 1/4" Q. C. terminals and safety wells accept
insulated female Q. C. terminals (mounting codes 2 & 5).
• UL Class F insulation system standard.
• Well suited for various industrial, commercial and residential applications.
Initial Dielectric Strength
Between Open Contacts: 1,500V rms.
Between Contacts and Coil: 2,500V rms.
6 kV surge using 1.2µs/50µs Impulse Wave or
.5µs – 100kHz Ring Wave
Contact Ratings @ 25°C with relay properly vented.
Remove vent nib after soldering and cleaning.
Arrangements: 1 Form A (SPST-NO), and 1 Form C (SPDT).
Initial Insulation Resistance
Between Mutually Insulated Elements: 109 ohms, min., @ 500VDC,
25°C and 50% R.H.
Material: Silver-cadmium oxide.
Mechanical Life: 10 million operations, typical.
Minimum Contact Load: 1A @ 5VDC or 12VAC.
Coil Data @ 25°C
Initial
Contact
Resistance:
75
milliohms,
max.,
@
min.
rated
current
(swDitchaetda).SheetVN4ooUlmt.acignoeam:l 5Cotoil
110VDC.
Power: 1.0W,
(approx.)
and
900mW
(approx.)
versions.
Typical Electrical Load & Life - 1 Watt Coil
Contact
Arrangement
Contact Load
Type of Load
Operations
Maximum Coil Power: 2.8 Watt.
Maximum Coil Temperature(5): Class F: 140°C.
Duty Cycle: Continuous.
1
30A @ 240VAC
UL General Purpose 100,000
25A @ 240VAC
Resistive Heater
100,000
5 20A/10A @ 240VAC UL General Purpose 100,000
20A/10A @ 240VAC
UL Resistive
100,000
20A/10A @ 28VDC
Resistive
100,000
Typical Electrical Load & Life - 900mW Coil
Contact
Arrangement
Contact Load
Type of Load
Operations
Coil Data - 1 Watt
Nominal DC Resistance Nominal Nominal
Voltage ± 10% (Ohms) Current (mA) Voltage
5 25
6 36
9 81
12 144
15 225
200 18
167 22
111 24
83 48
67 110
DC Resistance Nominal
± 10% (Ohms) Current (mA)
324
484
576
2,304
12,100
56
45
42
21
9
DataShee
1
120VAC
50 LRA/16 FLA
100,000
120VAC
30 LRA/11 FLA
200,000
UL 508/873 & CSA Contact Ratings - 1 Watt Coil
Voltage
Load Type
N.O. Contact
277VAC
Tungsten *
5.4A
277VAC
Ballast
10A
240VAC
Motor
2 HP
240VAC
Resistive *
30A
240VAC
General Purpose†
30A
240VAC
LRA/FLA **††
80A/30A
240VAC
Pilot Duty *
470VA
125VAC
Motor
1 HP
120VAC
LRA/FLA
98A/22A
120VAC
Tungsten *
8.3A
120VAC
Pilot Duty
470VA
28VDC
Resistive
20A
* Rated 6,000 operations.
DataSheet4U.com** Higher UL & CSA ratings available.
† For Form C application, derate current to 20A (N.O.), 10A (N.C.).
†† For Form C application, derate current to 67%.
N.C. Contact
3A
1/2 HP
20A
15A
30A/12A
275VA
1/4 HP
10A
Coil Data - 900mW
Nominal DC Resistance Nominal Nominal
Voltage ± 10% (Ohms) Current (mA) Voltage
5 27
6 40
9 97
12 155
15 256
18 380
20 450
185 22
150 24
93 28
77 36
59 48
47 110
44
DC Resistance Nominal
± 10% (Ohms) Current (mA)
545 40
660 36
890 31
1,450
25
2,560
13,450
19
8
Operate Data @ 25°C
Must Operate Voltage: 75% of nominal voltage or less.
Must Release Voltage: 10% of nominal voltage or more.
Operate Time (Including Bounce)§: 15 ms, max.
Release Time (Including Bounce)§: 15 ms, max.
§ At or From Nominal Coil Voltage
Note: Consult factory for other 900mW version contact ratings.
60
DataSheet4 U .com


T9AS5D12-xx 데이터시트, 핀배열, 회로
www.DataSheet4U.com
Ambient Temperature vs. Coil Voltage - 1 Watt Coil
Data below are average values and should be verified in application. Tests
were conducted within a 2' (.6 m) cube (still air); at nominal coil power @
25°C; with normally open contact loaded; and with 4' (1.22 m) long, #10
AWG load wires. P.C. board relays were mounted to a 30A, single side P.C.
board (6).
140
Environmental Data
Storage Temperature Range: -55°C to 130°C.
Operating Temperature Range(1): -55°C to +85°C.
Vibration, Operational: 0.065" (1.65mm) max. excursions from 10-55 Hz.
with no contact opening >100µs.
Shock, Operational: 10g for 11 ms with no contact opening >100µs.
Shock, Mechanical: 100g.
120
100
80
60
40
Sealed Relay, Vented (note 3);
20 Load Connections Via Q.C. Terminals,
PC Mount
0
60 80 100 120 140 160
Applied Continuous Coil Voltage (% of Rated Voltage)
140
0A
10A
20A
30A
180
Mechanical Data
Termination: Printed circuit and quick connect terminals (4).
Enclosures (all have 94V-0 flammability rating):
T9AP: Unsealed, plastic dust cover.
T9AS: Immersion cleanable, sealed plastic case (2 & 3).
T9AV: Vented, flux-tight, plastic cover.
Weight: Q.C. version: 1.2 oz. (33g) approx. (mounting code 2 & 5).
Sealed Model T9AS: 0.9 oz. (26g) approx. (mounting code 1).
120
et4U.com
100
80
0A
10A
20A
60 Relay With Dust Cover,
Flange Mount
30A Notes
40
60
140
80 100 120 140 160
Applied Continuous Coil Voltage (% of Rated Voltage)
180
(1) Operating ambient temperature must consider “Must Operate Voltage
Change Over Temperature,” Contact Temperature Rise, Coil Temperature
Rise (If coil is not allowed to cool) and Maximum Coil Temperature.
Specification ambient considers 20A load with coil cooled to ambient.
120 (2) Sealed relay terminals should not be bent.
(3) Remove knock-off nib after cleaning process for optimum life of sealed
100 relays.
80
60
40
20 Sealed Relay, Vented (note 3)
(4) Maximum soldering temperature is 500°F for 4 seconds.
(5) Class F coils are UL systems approved for maximum coil temperature of
140°C, by change of resistance method.
DataShee
0A (6) See application note 13C265 for proper relay mounting, termination,
DataS1200hAAeet4U.cocPlCmeabnoinagrdatnodmPCainbtoaainrd2c0o°nCdmucatxoirmwuidmthr.isCeo@il
rise test
30A.
performed
with
30A
PC Terminals For Coil & Contacts
30A
0
60 80 100 120 140 160 180
Applied Continuous Coil Voltage (% of Rated Voltage)
Ordering Information
Typical Part Number B T9A S 5 D 2 2 -12
1. Basic Series:
T9A = Low cost, printed circuit board/panel power relay.
2. Enclosure:
P = Unsealed, plastic dust cover (mounting code 5).
S = Immersion cleanable, knock off nib, sealed plastic case (mounting codes 1 & 2).
V = Vented, flux-tight (mounting code 1).
3. Contact Arrangement:
1 = 1 Form A (SPST-NO).
5 = 1 Form C (SPDT).
4. Coil Input:
D = DC voltage (1 Watt)
L = DC voltage (900mW)
5. Mounting & Termination:
1 = Printed circuit board mounting; PC terminals for coil & contacts (a).
2 = Printed circuit board mounting; PC terminals for coil & contacts, and .250" (6.35mm) quick connects for contacts (b).
5 = Flanged mounting; .187" (4.75mm) quick connects for coil and .250" (6.35mm) quick connects for contacts (c).
6. Contact Material:
2 = Silver-cadmium oxide.
7. Coil Voltage:
5 = 5VDC
6 = 6VDC
9 = 9VDC
12 = 12VDC
15 = 15VDC
18 = 18VDC
20 = 20VDC
22 = 22VDC
24 = 24VDC
36 = 36VDC
48 = 48VDC
110 = 110VDC
a) Only available with enclosure code “S” & “V”. b) Only available with enclosure code “S”.
c) Only available with enclosure code “P”.
Stock Items – The following items are normally maintained in stock for immediate delivery.
T9AP1D52-12
T9AP1D52-24
DataSheet4TT99UAA.PPc15oDDm5522--4182
T9AP5D52-24
T9AP5D52-48
T9AS1D12-110
T9AS1D12-12
T9AS1D12-18
T9AS1D12-24
T9AS1D12-48
T9AS1D12-5
T9AS1D22-110
T9AS1D22-12
T9AS1D22-24
T9AS1D22-48
T9AS1D22-5
T9AS1L12-12
T9AS1L12-24
T9AS5D12-110
T9AS5D12-12
T9AS5D12-18
T9AS5D12-24
T9AS5D12-48
T9AS5D12-5
T9AS5D22-110
T9AS5D22-12
T9AS5D22-24
T9AS5D22-48
T9AS5D22-5
T9AS5L12-12
T9AS5L12-24
DataSheet4 U .com
61




PDF 파일 내의 페이지 : 총 3 페이지

제조업체: Siemens

( siemens )

T9AS5D12-xx relay

데이터시트 다운로드
:

[ T9AS5D12-xx.PDF ]

[ T9AS5D12-xx 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


T9AS5D12-xx

(T9A Series) Low Cost 30 Amp PC Board or Panel Mount Relay - Siemens