|
Fujitsu Microelectronics |
POWER RELAY
1 POLE— 5 A (MEDIUM LOAD CONTROL)
VE SERIES
s FEATURES
q UL, CSA, VDE recognized
q 1 form A (SPST-NO) or 1 form C (SPDT) contact
q Low cost, miniature relay with big performance in small
package
—Surge strength: 4,000 V or 6,000 V
q Slim type—meets high density mounting requirement
q Wide operating range
q Easy circuit design with completely separated terminal
arrangement (coil and contact terminals)
q Plastic sealed type
www.DataSheet4U.com
s ORDERING INFORMATION
[Example]
VE – 12 H M S E – K – HV – VD
(a) (*) (b) (c) (d) (e) (f ) (g) (h) ( i )
(a) Series Name
VE: VE Series
(b) Nominal Voltage
Refer to the COIL DATA CHART
(c) Contact Rating
H : Heavy duty type
(d) Contact Arrangement
Nil : 1 form C (SPDT)
M : 1 form A (SPST-NO)
(e) Coil Type
Nil : Standard type
S : High sensitivity type
(f) Contact Material (Rating)
Nil : Gold overlay silver-nickel (N.C.: 3 A, N.O.: 5 A)
E : Silver-nickel (N.C.: 3 A, N.O.: 5 A)
5 : Silver cadmium oxide (N.C.: 5 A, N.O.: 5 A)
(g) Enclosure
K : Plastic sealed type
(h) Surge Strength
Nil : Standard type (4,000 V)
HV: High dielectric strength type (6,000 V)
(i) Standard
VD: UL, CSA, VDE approved type
Note: Actual marking omits the hyphen (-) of (*)
1
s SAFETY STANDARD AND FILE NUMBERS
UL508 (File No. E56140)
C22.2 No. 14 (File No. LR35579)
VDE 0435 (File No. 11039-4940-1011)
Please note that UL/CSA ratings may differ from the standard ratings.
Type
VE-H
VE-HM
VE-H5
VE-HM5
Nominal voltage
5 to 48 VDC
5 to 48 VDC
5 to 48 VDC
Contact rating
Normally open:
1/14 HP 125 VAC/250 VAC
5 A 30 VDC/250 VAC, resistive
Pilot duty D300
Normally close:
1/14 HP 125 VAC/250 VAC
3 A 30 VDC/250 VAC, resistive
Pilot duty D150
1/12 HP 125 VAC/250 VAC
5 A 30 VDC/250 VAC, resistive
Pilot duty D300
Normally open:
1/10 HP 125 VAC/250 VAC
5 A 30 VDC/250 VAC, resistive
Pilot duty D300
Normally close:
1/14 HP 125 VAC/250 VAC
5 A 30 VDC/250 VAC, resistive
VE SERIES
2
|