|
|
PDF PJ7800 Data sheet ( Hoja de datos )
| Número de pieza | PJ7800 | |
| Descripción | 3-Terminal Fixed Voltage Positive Regulators | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PJ7800 (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
|
No Preview Available !
PJ7800 Series
3-Terminal Fixed Voltage Positive Regulators
These voltage regulators are monolithic integrated
circuits designed as fixed-voltage regulators for a
wide variety of applications including local, on-card
regulation. These regulators employ internal current
limiting, thermal shutdown, and safe-area
compensation.
FEATURES
• Output Current up to 1 Ampere
• No External Components Required
• Internal Thermal Overload Protection
• Internal Short-Circuit Current Limiting
• Output Transistor Safe-Area Compensation
• Output Voltage Offered in 4% Tolerance
CIRCUIT SCHEMATIC
With adequate heatsinking they can deliver output
currents up to 1 ampere.
Although designed primarily as a fixed voltage
regulator, these devices can be used with external
components to obtain adjustable voltages and currents.
PIN ARRANGEMENT
TO-220
TO-220F
Pin: 1.Input
2.Ground
3.Output
(Heatsink surface connected to Pin 2.)
Representative Schematic Diagram
Standard Application
TYPICAL CONNECTING CIRCUIT
A common ground is required between the input and
the output voltages. The input voltage must remain
typically 2.0V above the output voltage even during
the low point on the Input ripple voltage.
XX = these two digits of the type number indicate
voltage.
* = Cin is required if regulator is located an
appreciable distance from power supply filter.
** = Co is not needed for stability; however, it does
improve transient response.
1-9 2002/01.rev.A
1 page  
PJ7800 Series
3-Terminal Fixed Voltage Positive Regulators
• PJ7812 ELECTRICAL CHARACTERISTICS
Vin=19V, Iout=500mA, 0℃≤Tj≤125℃, Cin=0.33μF, Cout=0.1μF; unless otherwise specified.)
CHARACTERISTICS
Output Voltage
Line Regulation
Load Regulation
Quiescent Current
Quiescent Current Change
Output Noise Voltage
Ripple Rejection Ratio
Voltage Drop
Output Resistance
Output Short Circuit Current
Peak Output Current
Temperature Coefficient of
Output Voltage
SYMBOL
Vout
REGline
REGload
Iq
Δlq
Vn
RR
Vdrop
Rout
Ios
Io peak
ΔVout/ΔTj
TEST CONDITIONS
Tj=25℃
14.5V≤Vin≤27V, 5mA≤Iout≤1.5A, PD ≤15W
14V≤Vin≤30V
Tj=25℃ 15V≤Vin≤19V
10mA≤Iout≤1.5A
Tj=25℃ 250mA≤Iout≤750mA
Tj=25℃, Iout=0
14.5V≤Vin≤30V
5mA≤Iout≤1.5A
10Hz≤f≤100KHz, Tj=25℃
f=120Hz, 15V≤Vin≤25V
Iout=1.0A, Tj=25℃
f=1KHz
Tj=25℃
Tj=25℃
Iout=5mA, 0℃≤Tj≤125℃
MIN.
11.53
11.42
--
--
--
--
--
--
--
--
55
--
--
--
--
--
TYP.
12
12
10
3
12
4
4.3
--
--
75
71
2
18
350
2.2
-1
MAX.
12.48
12.60
240
120
240
120
8
1
0.5
--
--
--
--
--
--
--
UNIT
V
mV
mV
mV
mV
mA
mA
mA
μV
dB
V
mΩ
mA
A
mV/℃
• PJ7815 ELECTRICAL CHARACTERISTICS
(Vin=23V, Iout=500mA, 0℃≤Tj≤125℃, Cin=0.33μF, Cout=0.1μF; unless otherwise specified.)
CHARACTERISTICS
SYMBOL
TEST CONDITIONS
MIN. TYP. MAX. UNIT
Output Voltage
Vout
Tj=25℃
14.42 15 15.60 V
17.5V≤Vin≤30V, 5mA≤Iout≤1.5A, PD ≤15W 14.28 15 15.75
Line Regulation
REGline Tj=25℃
17.5V≤Vin≤30V
18V≤Vin≤22V
-- 12 300 mV
-- 3 150 mV
Load Regulation
REGload Tj=25℃
10mA≤Iout≤1.5A
250mA≤Iout≤750mA
-- 12 300 mV
-- 4 150 mV
Quiescent Current
Iq Tj=25℃, Iout=0
-- 4.3 8 mA
Quiescent Current Change
Δlq
17.5V≤Vin≤30V
5mA≤Iout≤1.5A
-- -- 1 mA
-- -- 0.5 mA
Output Noise Voltage
Vn 10Hz≤f≤100KHz, Tj=25℃
-- 90 -- μV
Ripple Rejection Ratio
RR f=120Hz, 18V≤Vin≤28V
54 70 -- dB
Voltage Drop
Vdrop Iout=1.0A, Tj=25℃
-- 2 -- V
Output Resistance
Rout f=1KHz
-- 19 -- mΩ
Output Short Circuit Current
Ios Tj=25℃
-- 230 -- mA
Peak Output Current
Io peak Tj=25℃
-- 2.2 --
A
Temperature Coefficient of
ΔVout/ΔTj Iout=5mA, 0℃≤Tj≤125℃
-- -1 -- mV/℃
Output Voltage
* Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible, and
thermal effects must be taken into account separately.
** This specification applies only for DC power dissipation permitted by absolute maximum ratings.
5-9 2002/10.rev. A
5 Page | ||
| Páginas | Total 9 Páginas | |
| PDF Descargar | [ Datasheet PJ7800.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PJ7800 | 3-Terminal Fixed Voltage Positive Regulators | ETC |
| PJ7805B | 3-Terminal Fixed Voltage Positive Regulators |  Promax-Johnton |
| PJ7806B | 3-Terminal Fixed Voltage Positive Regulators | Promax-Johnton |
| PJ7809B | 3-Terminal Fixed Voltage Positive Regulators | Promax-Johnton |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |