|
Semtech Corporation |
7.5 AMP POSITIVE
VOLTAGE REGULATOR
EZ1083
EZ1083B
June 7, 1999
TEL:805-498-2111 FAX:805-498-3804 WEB:http://www.semtech.com
DESCRIPTION
The EZ1083 series of high performance positive
voltage regulators are designed for use in applications
requiring low dropout performance at full rated current.
Additionally, the EZ1083 series provides excellent
regulation over variations in line, load and temperature.
Outstanding features include low dropout performance
at rated current, fast transient response, internal
current limiting and thermal shutdown protection of the
output device. The EZ1083 has both fixed and
adjustable voltage options, while the EZ1083B is
adjustable only for cost sensitive applications. These
devices are available in the popular TO-220 package.
FEATURES
• Low dropout performance,
1.3V max. for EZ1083,
1.45V max. for EZ1083B
• Full current rating over line and temperature
• Fast transient response
• ±2% total output regulation over line, load
and temperature (±2.4% for EZ1083B)
• Adjust pin current max 90µA over temperature
• Fixed/adjustable output voltage (EZ1083)
• Line regulation typically 0.015%
• Load regulation typically 0.05%
• TO-220 package
ORDERING INFORMATION
APPLICATIONS
• High current microprocessor supplies
• Post regulators
BLOCK DIAGRAM
DEVICE
PACKAGE
VOUT VOLTS
EZ1083CT-X.X
EZ1083BCT
TO-220
See Note (1)
1.30 to 5.7
Note:
(1) Where X.X denotes voltage options. Available volt-
ages are: 1.5V, 2.5V and 3.3V. Leave blank for ad-
justable version (1.3 to 5.7V). Contact factory for addi-
tional voltage options.
PIN CONFIGURATIONS
ABSOLUTE MAXIMUM RATINGS
Parameter
Input Supply Voltage
Power Dissipation
Thermal Resistance
Junction to Case
Thermal Resistance
Junction to Ambient
Operating Junction
Temperature Range
Storage Temperature
Range
Lead Temperature
(Soldering) 10 Sec.
Symbol Maximum Units
VIN 7 V
PD
Internally
Limited
W
θJC 2 °C/W
θJA 50 °C/W
TJ 0 to 125 °C
TSTG -65 to 150 °C
TLEAD
260
°C
© 1999 SEMTECH CORP.
1
652 MITCHELL ROAD NEWBURY PARK CA 91320
June 7, 1999
7.5 AMP POSITIVE
VOLTAGE REGULATOR
EZ1083
EZ1083B
ELECTRICAL CHARACTERISTICS
Unless otherwise specified, Adj VIN = 2.75V to 7.0V and Adj IO = 10mA to 7.5A;
Fixed VIN = 4.75 to 7.0V and Fixed IO = 0 mA to 7.5A
Parameter
Output Voltage(1)
EZ1083-X.X
Reference Voltage (1)
EZ1083
Reference Voltage (1)
EZ1083B
Line Regulation(1)
Load Regulation(1)
Dropout Voltage(2)
EZ1083, EZ1083-X.X
Symbol
VO
VREF
VREF
REG(LINE)
REG(LOAD)
VD
Test Conditions
VIN IO
5V 0mA
5V 10mA
5V 10mA
10mA
5V
TJ(5)
25°C
O.T.
25°C
O.T.
25°C
O.T.
25°C
O.T.
25°C
O.T.
25°C
O.T.
Test Limits
Min Typ Max Units
0.99lVOl
0.98lVOl
1.238
VO
VO
1.250
1.01lVOl
1.02lVOl
1.262
V
V
1.225
1.250 1.275
1.233
1.250 1.267 V
1.220
1.250 1.280
0.015 0.2 %
0.035
0.2
0.05 0.3 %
0.2 0.4
1V
1.10 1.30
EZ1083B
1.20 1.45
Current Limit
ICL
Quiescent Current
Fixed Voltage Version
IQ
5V
O.T.
7.5
O.T.
9.5 A
12 14 mA
Temperature Coefficient
Adjust Pin Current
TC
IADJ
O.T.
25°C
O.T.
0.005
55
%/°C
µA
90
Adjust Pin Current
Change
∆IADJ
O.T. 0.2 5 µA
Temperature Stability
TS
5V
0.5A
O.T.
0.5
%
Minimum Load Current
Adj Voltage Version
IO
5V
O.T. 5 10 mA
RMS Output Noise(3)
VN
25°C
0.003
Ripple Rejection Ratio(4)
RA
5V
7.5A O.T. 60
72
%VO
dB
NOTES:
(1) Low duty cycle pulse testing with Kelvin connections required.
(2) ∆VOUT, ∆VREF = 1%.
(3) Bandwidth of 10 Hz to 10 kHz.
(4) 120 Hz input ripple (CADJ for ADJ = 25µF).
(5) Over Temp. (O.T.) = over specified operating junction temperature range.
© 1999 SEMTECH CORP.
2
652 MITCHELL ROAD NEWBURY PARK CA 91320
|