|
|
PDF RR2L6SDD Data sheet ( Hoja de datos )
| Número de pieza | RR2L6SDD | |
| Descripción | Rectifier diode | |
| Fabricantes | ROHM Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de RR2L6SDD (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Rectifier Diode
RR2L6SDD
Series
Standard Rectifier
Dimensions (Unit : mm)
2.6±0.2
Datasheet
AEC-Q101 Qualified
Land size figure (Unit : mm)
2.0
Application
General rectification
Features
1) Low forward voltage
2) Small power mold type
(PMDS)
18
12
0.1±0.02
0.1
1.5±0.2
2.0±0.2
ROHM : PMDS
JEDEC :SOD-106
1 2 Manufacture Date
Taping specifications (Unit : mm)
Construction
Silicon diffused junction type
2.0±0.05
4.0±0.1
PMDS
Structure
φ11.5555±00..05
cathode
anode
0.3
2.9±0.1
4.0±0.1
φ1.15.555
2.8MAX
Absolute maximum ratings (Tl = 25°C)
Parameter
Symbol
Conditions
Limits
Repetitive peak reverse voltage
Reverse voltage
Average current
Non-repetitive forward surge current
Operating junction temperature
Storage temperature
VRM
VR
Io
IFSM
Tj
Tstg
Duty ≦0.5
600
Direct voltage
On glass epoxy substrate,
60Hz half sin wave , Resistive load
Tl=95°C
60Hz half sin wave , Non-repetitive at Tj=25°C
600
2
50
150
55 to 150
Unit
V
V
A
A
°C
°C
Electrical characteristics (Tj = 25°C)
Parameter
Symbol
Forward voltage
Reverse current
VF
IR
Conditions
IF=2A
VR=600V
Min. Typ. Max. Unit
- 0.9 1.1 V
- 0.01 10 A
www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
1/4
2014.09 - Rev.A
1 page  
Notice
Notes
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifica-
tions :
3) Although ROHM is continuously working to improve product reliability and quality, semicon-
ductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi-
cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
7) The Products specified in this document are not designed to be radiation tolerant.
8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
11) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
R1102A
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet RR2L6SDD.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| RR2L6SDD | Rectifier diode | ROHM Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |