파트넘버.co.kr EDI88512CA-XMXG 데이터시트 PDF


EDI88512CA-XMXG 반도체 회로 부품 판매점

512Kx8 Plastic Monolithic SRAM CMOS



Microsemi 로고
Microsemi
EDI88512CA-XMXG 데이터시트, 핀배열, 회로
EDI88512CA-XMXG
WPS512K8X-XRJXG
512Kx8 Plastic Monolithic SRAM CMOS
FEATURES
 512Kx8 bit CMOS Static
 Random Access Memory
• Access Times of 17, 20, 25ns
• Data Retention Function (LPA version)
• Extended Temperature Testing
• Data Retention Functionality Testing
 36 lead JEDEC Approved Revolutionary Pinout
• Plastic SOJ (Package 319)
 Single +5V (±10%) Supply Operation
 RoHS compliant
WEDC's ruggedized plastic 512Kx8 SRAM that allows the user to
capitalize on the cost advantage of using a plastic component while
not sacricing all of the reliability available in a full military device.
Extended temperature testing is performed with the test patterns
developed for use on WEDC’s fully compliant 512Kx8 SRAMs.
WEDC fully characterizes devices to determine the proper test
patterns for testing at temperature extremes. This is critical because
the operating characteristics of device change when it is operated
beyond the commercial guarantee a device that operates reliably
in the eld at temperature extremes. Users of WEDC’s ruggedized
plastic benet from WEDC’s extensive experience in characterizing
SRAMs for use in military systems.
WEDC ensures Low Power devices will retain data in Data
Retention mode by characterizing the devices to determine the
appropriate test conditions. This is crucial for systems operating
at -40°C or below and using dense memories such as 512Kx8s.
WEDC’s ruggedized plastic SOJ is footprint compatible with
WEDC’s full military ceramic 36 pin SOJ.
FIGURE 1 – PIN CONFIGURATION
TOP VIEW
A0 1
A1 2
A2 3
A3 4
A4 5
CS# 6
I/O0 7
I/O1 8
VCC 9
VSS 10
I/O2 11
I/O3 12
WE# 13
A5 14
A6 15
A7 16
A8 17
A9 18
36pin
Revolutionary
36 NC
35 A18
34 A17
33 A16
32 A15
31 OE#
30 I/O7
29 I/O6
28 VSS
27 VCC
26 I/O5
25 I/O4
24 A14
23 A13
22 A12
21 A11
20 A10
19 NC
AØ-18
WE#
CS#
OE#
Microsemi Corporation reserves the right to change products or specications without notice.
May 2014 © 2014 Microsemi Corporation. All rights reserved.
Rev. 11
1
PIN Description
I/O0-7
A0-18
WE#
CS#
OE#
VCC
VSS
NC
Data Inputs/Outputs
Address Inputs
Write Enables
Chip Selects
Output Enable
Power (+5V ±10%)
Ground
Not Connected
BLOCK DIAGRAM
Memory Array
Address
Buffer
Address
Decoder
I/O
Circuits
I/OØ-7
Microsemi Corporation • (602) 437-1520 • www.microsemi.com/pmgp


EDI88512CA-XMXG 데이터시트, 핀배열, 회로
EDI88512CA-XMXG
WPS512K8X-XRJXG
ABSOLUTE MAXIMUM RATINGS
Parameter
Unit
Voltage on any pin relative to Vss
-0.5 to 7.0
V
Operating Temperature TA (Ambient)
Commercial
0 to +70
°C
Industrial
-40 to +85
°C
Military
-55 to +125
°C
Storage Temperature, Plastic
-65 to +150
°C
Power Dissipation
1.5 W
Output Current
20 mA
Junction Temperature, TJ
175 °C
NOTE:
Stress greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device.
This is a stress rating only and functional operation of the device at these or any other conditions greater than
those indicated in the operational sections of this specication is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
OE# CS# WE#
XHX
HLH
L LH
XLL
TRUTH TABLE
Mode
Standby
Output Deselect
Read
Write
Output
High Z
High Z
Data Out
Data In
Power
Icc2, Icc3
Icc1
Icc1
Icc1
RECOMMENDED OPERATING CONDITIONS
Parameter
Supply Voltage
Supply Voltage
Input High Voltage
Input Low Voltage
Symbol
VCC
VSS
VIH
VIL
Min
4.5
0
2.0
-0.5
Typ Max Unit
5.0 5.5
V
00V
— VCC + 0.5 V
— +0.8 V
CAPACITANCE
TA = +25°C
Parameter
Symbol
Condition
Address Lines
CI VIN = Vcc or Vss, f = 1.0MHz
Data Lines
CO VIN = Vcc or Vss, f = 1.0MHz
These parameters are sampled, not 100% tested.
Max Unit
8 pF
8 pF
DC CHARACTERISTICS
VCC = 5V, VSS = 0V, -55°C TA +125°C
Parameter
Symbol
Input Leakage Current
ILI
Output Leakage Current
ILO
Operating Supply Current
ICC
Standby Current
ISB
Output High Volltage
VOH
Output Low Voltage
VOL
NOTE: DC test conditions: VIL = 0.3V, VIH = VCC -0.3V
Conditions
VCC = 5.5, VIN = VSS to VCC
CS# = VIL, OE# = VIH, VOUT = VSS to VCC
CS# = VIL, OE# = VIH, f = 5MHz, VCC = 5.5
CS# = VIH, OE# = VIH, f = 5MHz, VCC = 5.5
IOH = -4.0mA, VCC = 4.5
IOL = 8.0mA, VCC = 4.5
Min
2.4
Max Units
10 μA
10 μA
180 mA
15 mA
V
0.4 V
AC TEST CONDITIONS
Figure 1
Q
255Ω
Figure 2
Vcc
480Ω
30pF
Q
255Ω
Vcc
480Ω
Input Pulse Levels
Input Rise and Fall Times
Input and Output Timing Levels
Output Load
NOTE: For tEHQZ, tGHQZ and tWLQZ, CL = 5pF (Figure 2)
5pF
VSS to 3.0V
5ns
1.5V
Figure 1
Microsemi Corporation reserves the right to change products or specications without notice.
May 2014 © 2014 Microsemi Corporation. All rights reserved.
Rev. 11
2
Microsemi Corporation • (602) 437-1520 • www.microsemi.com/pmgp




PDF 파일 내의 페이지 : 총 9 페이지

제조업체: Microsemi

( microsemi )

EDI88512CA-XMXG ram

데이터시트 다운로드
:

[ EDI88512CA-XMXG.PDF ]

[ EDI88512CA-XMXG 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


EDI88512CA-XMXG

512Kx8 Plastic Monolithic SRAM CMOS - Microsemi