|
ECLIPTEK |
EP13 Series
• RoHS Compliant (Pb-free)
• EPO™ Programmable Oscillators
• 3.3V supply voltage
• 14 pin DIP package
• HCMOS output
• Stability to 50ppm
• Custom lead length,
gull wing options available
EP13
www.DataSheet4U.com
H 5.08
W 20.8
L 13.2
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range
1.000MHz to 106.250MHz
Operating Temperature Range
-20°C to 70°C or -40°C to 85°C
Storage Temperature Range
-55°C to 125°C
Supply Voltage (VDD)
Input Current
3.3VDC ±0.3VDC
28mA Maximum (Unloaded)
Disable Current (TS Option)
16mA Maximum (Pin 1=Ground)
Standby Current (PD Option)
20µA Maximum (Pin 1=Ground)
Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25°C, ±100ppm or ±50ppm Maximum
Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, First Year Aging
at 25°C, Shock, and Vibration
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
w/HCMOS Load
w/HCMOS Load
20% to 80% of waveform w/HCMOS Load
VDD-0.4VDC Minimum IOH=-8mA
0.4VDC Maximum IOL=+8mA
4 nSeconds Maximum
Duty Cycle
at 50% of waveform w/HCMOS Load
50 ±10(%) (Standard)
at 50% of waveform w/HCMOS Load (<50.000MHz Only)
50 ±5(%) (Optional)
Load Drive Capability
<50.000MHz
30pF HCMOS Load Maximum
>50.000MHz
15pF HCMOS Load Maximum
Output Control Function
TS
Tri-State
P D Power Down
Output Control Function Input Voltage
Aging (at 25°C)
VIH: No Connection or >70% of VDD
VIL: (TS Option) <20% of VDD
VIL: (PD Option) <20% of VDD
Enables Output
Disable Output: High Impedance
Disable Output: Logic Low
±5ppm / year Maximum
Start Up Time
10 mSeconds Maximum
RMS Jitter
<12.000MHz
50pSec Maximum, 15pSec Typical
>12.000MHz
13pSec Maximum, 10pSec Typical
Peak to Peak Jitter
<12.000MHz
500pSec Maximum, 100pSec Typical
>12.000MHz
100pSec Maximum, 60pSec Typical
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
EP13
PACKAGE
14 pin DIP
VOLTAGE
3.3V
CLASS
OS44
REV.DATE
12/05
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
PART NUMBERING GUIDE
EP13 00 ET T TS - 24.000M - CL125
FREQUENCY TOLERANCE / STABILITY
00=±100ppm Maximum (Standard)
45=±50ppm Maximum
OPERATING TEMP. RANGE
Blank=-20°C to 70°C or ET=-40°C to 85°C
DUTY CYCLE
Blank=50 ±10(%) (Standard), T=50 ±5(%)
NOTES
www.DataSheet4U.com
AVAILABLE OPTIONS
Blank=None (Standard)
CLXXX=Custom Lead Length (See Page 133)
G=Full Size Gull Wing (See Page 132)
FREQUENCY
OUTPUT CONTROL FUNCTION
TS=Tri-State, PD=Power Down
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Tri-State or Power Down
Pin 7: Ground/Case Ground
Pin 8: Output
Pin 14: Supply Voltage
MARKING SPECIFICATIONS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Characteristic
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Lead Integrity
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
Specification
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2004
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-883, Method 210
MIL-STD-883, Method 215
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
EP13
PACKAGE
14 pin DIP
Line 1: ECLIPTEK
Line 2: EP13 TS
Output Control Function
PD = Power Down
TS = Tri-State Enable High
Series Designator
Line 3: XX.XXX M
Frequency in MHz
(5 Digits Maximum + Decimal)
Line 4: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Note: Pin 1 shall be designated with a dot
VOLTAGE
3.3V
CLASS
OS44
REV.DATE
12/05
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
|