파트넘버.co.kr IQMS-133 데이터시트 PDF


IQMS-133 반도체 회로 부품 판매점

MEMS Oscillator



IQD 로고
IQD
IQMS-133 데이터시트, 핀배열, 회로
ISSUE 1; March 2016
Description
Low jitter and low current MEMS oscillator with CMOS output
in a plastic package featuring a programmable drive strength
feature to optimise specific clock applications. Factory
programmable for a short lead time.
Uses SiTime’s MEMS First™ technology.
APPLICATIONS:
Industrial & Commercial -
Digital cameras
Digital video recorders
IP cameras
Tablets
e-Books
Solid state devices
Optical networks
High-speed Serial Protocols -
USB
SATA
SAS
Firewire
100M / 1G / 10G Ethernet
This specification provides guidance on the performance of
3.3V devices in a 3.2 x 2.5mm package. Other supply voltage
options are available at 1.5V, 1.8V, 2.5V, 2.8V or 3.0V. Other
package size options are available as 2.0 x 1.6mm, 2.5 x
2.0mm, 5.0 x 3.2mm or 7.0 x 5.0mm.
Note: All Min and Max limits are specified over temperature
and rated operating voltage with 15pF output load unless
otherwise stated. Typical values are @ 25°C and nominal
supply voltage.
Frequency Parameters
Frequency
1.0MHz to 110.0MHz
Frequency Stability
±20.00ppm to ±50.00ppm
Frequency Stability: Inclusive of frequency tolerance @ 25°C,
operating temperature range, supply voltage variation, load
variation and 1st year ageing.
Electrical Parameters
Supply Voltage
3.3V ±10%
Absolute Maximum Supply Voltage Rating: -0.5 to 4.0V
Supply Current (F=20MHz, @ Vs=3.3V and no load): 4.5mA
max
Operating Temperature Ranges
-20 to 70°C
-40 to 85°C
MEMS Oscillator Specification
IQMS-133
Outline (mm)
Sales Office Contact Details:
UK: +44 (0)1460 270200
Germany: 0800 1808 443
France: 0800 901 383
USA: +1.760.318.2824
Printed on 31 Aug 16 15:58 using Model Data Sheet V1.2550
Web: www.iqdfrequencyproducts.com
Page 1 of 3


IQMS-133 데이터시트, 핀배열, 회로
Output Details
Output Compatability
CMOS
Drive Capability
15pF
Output Voltage Levels:
Output Low (VoL): 10%Vs max
Output High (VoH): 90%Vs min
Programmable Drive Strength: The IQMS-133 includes a
programmable drive strength feature to provide a flexible tool
to optimise the clock rise/fall time for specific applications.
Slower rise and fall time provides reduced EMI. Fast rise and
fall time gives reduced jitter. Please contact an IQD Sales
Office to discuss options.
Output Control
Enable/Disable Mode (OE):
Logic ‘1’ (70%Vs min) to pad 1 enables the oscillator output.
Logic ‘0’ (30%Vs max) to pad 1 disables the oscillator output,
the output goes to a high impedance state. Only the output
driver is disabled. Supply current=4.2mA max. A pull-up
resistor of 10kΩ max is recommended if pad 1 is not externally
connected.
Output Enable/Disable Time (F=110MHz): 130ns max
(Note: For other frequencies time=100ns + 3 cycles.)
Standby Mode (ST):
Logic ‘1’ (70%Vs min) to pad 1 enables the oscillator output.
Logic ‘0’ (30%Vs max) to pad 1 the oscillator output is low level
(weak pull-down). Device goes to sleep mode. Supply current
reduces to 4.3μA max. A pull-up resistor of 10kΩ max is
recommended if pad 1 is not externally connected.
Resume Time (measured from the time pad 1 crosses 50%
threshold): 5ms max
No Connect Mode (NC):
No connection to pad 1 enables the oscillator output.
Input Pull-Up Impedance:
Pad 1: OE logic '1' or logic '0', or ST logic '1': 150kmax
Pad 1: ST logic '0': 2Mmin
Start Up Time (measured from the time Vs reaches its rated
minimum value): 5ms max
Noise Parameters
Period Jitter (F=75MHz): 3ps RMS max
Phase Jitter (F=75MHz, 12kHz to 20MHz): 2ps RMS max
Peak to Peak Jitter (F=75MHz): 25ps max
Environmental Parameters
Storage Temperature Range: –65 to 150°C
Junction Temperature: 150°C max
Electrostatic Discharge: 2000V max
Mechanical Shock: MIL-STD-883F, Method 2002.
Vibration: MIL-STD-883F, Method 2007.
Thermal Cycling: JESD-22, Method A104.
Solderability: MIL-STD-883F, Method 2003.
Manufacturing Details
Maximum Process Temperature: 260°C (40secs max)
Note: Connect a capacitor of 0.1μF min between Vs and GND.
MEMS Oscillator Specification
IQMS-133
Sales Office Contact Details:
UK: +44 (0)1460 270200
Germany: 0800 1808 443
France: 0800 901 383
USA: +1.760.318.2824
Printed on 31 Aug 16 15:58 using Model Data Sheet V1.2550
Web: www.iqdfrequencyproducts.com
Page 2 of 3




PDF 파일 내의 페이지 : 총 3 페이지

제조업체: IQD

( iqd )

IQMS-133 oscillator

데이터시트 다운로드
:

[ IQMS-133.PDF ]

[ IQMS-133 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


IQMS-133

MEMS Oscillator - IQD



IQMS-134

MEMS Oscillator - IQD



IQMS-135

MEMS Oscillator - IQD



IQMS-136

MEMS Oscillator - IQD



IQMS-137

MEMS Oscillator - IQD



IQMS-138

MEMS Oscillator - IQD