|
Toshiba Semiconductor |
MOSFETs Silicon P-Channel MOS (U-MOS)
TPC8133
1. Applications
• Lithium-Ion Secondary Batteries
• Power Management Switches
2. Features
(1) Small footprint due to small and thin package
(2) Low drain-source on-resistance: RDS(ON) = 11 mΩ (typ.) (VGS = -10 V)
(3) Low leakage current: IDSS = -10 µA (max) (VDS = -40 V)
(4) Enhancement mode: Vth = -0.8 to -2.0 V (VDS = -10 V, ID = -0.5 mA)
3. Packaging and Internal Circuit
TPC8133
1, 2, 3: Source
4: Gate
5, 6, 7, 8: Drain
SOP-8
4. Absolute Maximum Ratings (Note) (Ta = 25 unless otherwise specified)
Characteristics
Symbol
Rating
Unit
Drain-source voltage
VDSS -40 V
Gate-source voltage
VGSS
-25/+20
Drain current (DC)
(Note 1)
ID
-9 A
Drain current (pulsed)
(Note 1)
IDP
-36
Power dissipation
(t = 10 s)
(Note 2)
PD
1.9 W
Power dissipation
(t = 10 s)
(Note 3)
PD
1.0 W
Single-pulse avalanche energy
(Note 4)
EAS
37 mJ
Avalanche current
IAR -9 A
Channel temperature
Tch 150
Storage temperature
Tstg -55 to 150
Note:
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
1 2010-12-06
Rev.1.0
5. Thermal Characteristics
Characteristics
Channel-to-ambient thermal resistance
Channel-to-ambient thermal resistance
(t = 10 s)
(t = 10 s)
(Note 2)
(Note 3)
Note 1: Ensure that the channel temperature does not exceed 150.
Note 2: Device mounted on a glass-epoxy board (a), Figure 5.1
Note 3: Device mounted on a glass-epoxy board (b), Figure 5.2
Note 4: VDD = -24 V, Tch = 25 (initial), L = 0.5 mH, RG = 25 Ω, IAR = -9 A
TPC8133
Symbol
Rth(ch-a)
Rth(ch-a)
Max Unit
65.7 /W
125 /W
Fig. 5.1 Device Mounted on a Glass-Epoxy
Board (a)
Fig. 5.2 Device Mounted on a Glass-Epoxy
Board (b)
Note: This transistor is sensitive to electrostatic discharge and should be handled with care.
2 2010-12-06
Rev.1.0
|