|
|
Número de pieza | K4004-01MR | |
Descripción | Power MOSFET ( Transistor ) | |
Fabricantes | Fuji | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de K4004-01MR (archivo pdf) en la parte inferior de esta página. Total 18 Páginas | ||
No Preview Available ! SPECIFICATION
Device Name : Power MOSFET
Type Name
Spec. No.
: 2SK4004-01MR
: MS5F5983
Date : Jan.-31-2005
DATE
DRAWN Jan.-31-'05
CHECKED Jan.-31-'05
Jan.-31-'05
NAME
APPROVED
Fuji Electric Device Technology Co.,Ltd.
MS5F5983
1 / 18
H04-004-05
Free Datasheet http://www.datasheet4u.net/
1 page Fig.1 Test circuit
L
50 D.U.T Vcc=50V
Single Pulse Test
Vcc
Fig.2 Operating waveforms
-15V
+10V
IDP
0
VGS
BVDSS
VDS
ID
Fuji Electric Device Technology Co.,Ltd.
MS5F5983
5 / 18
H04-004-03
Free Datasheet http://www.datasheet4u.net/
5 Page Theheatsinkshouldhaveaflatnesswithin±30μmandroughnesswithin10μm.Also,keepthetightening
torque within the limits of this specification.
Improper handling may cause isolation breakdown leading to a critical accident.
ex.) Over plane off the edges of screw hole. (Recommended plane off the edge is C<1.0mm)
We recommend the use of thermal compound to optimize the efficiency of heat radiation. It is important to
evenly apply the compound and to eliminate any air voids.
Storage
The MOSFETs must be stored at a standard temperature of 5 to 35 C and relative humidity of 45 to 75%.
If the storage area is very dry, a humidifier may be required. In such a case, use only deionized water or boiled
water, since the chlorine in tap water may corrode the leads.
The MOSFETs should not be subjected to rapid changes in temperature to avoid condensation on the surface
of the MOSFETs. Therefore store the MOSFETs in a place where the temperature is steady.
The MOSFETs should not be stored on top of each other, since this may cause excessive external force on the
case.
The MOSFETs should be stored with the lead terminals remaining unprocessed. Rust may cause presoldered
connections to fail during later processing.
The MOSFETs should be stored in antistatic containers or shipping bags.
11.Appendix
This products does not contain PBBs (Polybrominated Biphenyl) or PBDEs (Polybrominated Diphenyl Ether ) ,
substances.
This products does not contain Class-I ODS and Class-II ODS substances set force by ‘CleanAirActofUS’
law.
If you have any questions about any part of this Specification, please contact Fuji
Electric or its sales agent before using the product.
Neither Fuji nor its agents shall be held liable for any injury caused by using the products
not in accordance with the instructions.
The application examples described in this specification are merely typical uses of Fuji
Electric products.
This specification does not confer any industrial property rights or other rights, nor
constitute a license for such rights.
Fuji Electric Device Technology Co.,Ltd.
MS5F5983
11 / 18
H04-004-03
Free Datasheet http://www.datasheet4u.net/
11 Page |
Páginas | Total 18 Páginas | |
PDF Descargar | [ Datasheet K4004-01MR.PDF ] |
Número de pieza | Descripción | Fabricantes |
K4004-01MR | Power MOSFET ( Transistor ) | Fuji |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |