|
ROHM Semiconductor |
BD6074GUT
LED Drivers for LCD Backlights
White Backlight LED Drivers
for Small to Medium LCD Panels
(Switching Regulator Type)
BD6074GUT
No.11040EAT39
●Description
The BD6074GUT is a white LED driver IC with synchronous rectification that can drive up to 4LEDs.
With synchronous rectification (no external shottky diode required) and small package, they can save mount space.
And the brightness of LED can be adjusted by using PWM pulse on EN pin.
●Features
1) Synchronous rectification Boost DC/DC converter
2) No external schottky diode required
3) Driving 4 series white LEDs
4) Over voltage protection
5) Protect open and short output
6) Thermal shut down
7) Brightness adjustment by external PWM pulse
8) Small and Thin CSP package in 8pins
●Applications
White LED Backlight
Torch light and easy flash for camera of mobile phone
●Absolute maximum ratings (Ta=25℃)
Parameter
Symbol
Maximum applied voltage 1
VMAX1
Maximum applied voltage 2
Power dissipation
VMAX2
Pd
Ratings
7 *1
20 *1
800 *2
Unit Condition
V Vin, EN, VFB, TEST
V SW, Vout
mW
Operating temperature range
Topr
-30~+85
℃
Storage temperature range
Tstg
-55~+150
℃
*1 These value are based on GND and GNDA pins.
*2 50mm×58mm×1.75mm At glass epoxy board mounting. When it’s used by more than Ta=25 ℃, it’s reduced by 6.4mW/℃.
●Operating range(Ta=-30℃~+85℃)
Parameter
Symbol
Power supply voltage
Vin
Ratings
Min. Typ. Max.
2.7 3.6 5.5
Unit
V
Condition
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
1/15
2011.12 - Rev.A
BD6074GUT
Technical Note
●Electrical characteristics
Unless otherwise specified Ta =-30℃ ~+85℃, Vin=3.1~5.5V
Parameter
Limits
Symbol
Min. Typ.
[ EN terminal ]
EN threshold voltage (Low)
VthL
-
-
Max.
0.4
EN threshold voltage (High)
VthH
1.4
-
-
EN terminal input current
Iin - 18.3 30.0
EN terminal output current
[ Switching regulator ]
Quiescent Current
Iout -2.0 -0.1
-
Iq - 0.1 2.0
Current Consumption
Idd - 1.1 1.5
Feedback voltage
Vfb 0.47 0.50 0.53
Inductor current limit
Icoil 310 400 490
SW saturation voltage
Vsat
- 0.10 0.28
SW on resistance P
Ronp - 2.1 3.2
Switching frequency
fSW 0.8 1.0 1.2
Duty cycle limit
Duty
82.7 92.5
-
Output voltage range
Vo - - 18.0
Over voltage limit
Ovl 18.0 18.5 19.0
Start up time
Ts
*1 This parameter is tested with DC measurement.
- 0.5 1.0
Unit Condition
V
V
µA EN=5.5V
µA EN=0
µA EN=0V
mA EN=2.6V,VFB=1.0V,VIN=3.6V
V
mA Vin=3.6V *1
V Isw=200mA, Vout=13V
Ω Ipch=200mA,Vout=13V
MHz
% VFB=0V
V
V VFB=0V
ms
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
2/15
2011.12 - Rev.A
|