파트넘버.co.kr ADD5201 데이터시트 PDF


ADD5201 반도체 회로 부품 판매점

White LED Driver



Analog Devices 로고
Analog Devices
ADD5201 데이터시트, 핀배열, 회로
Data Sheet
High Efficiency, Eight-String, White LED
Driver for LCD Backlight Applications
ADD5201
FEATURES
White LED driver based on inductive boost converter
Integrated 50 V MOSFET with 2.9 A peak current limit
Input voltage range: 6 V to 21 V
Maximum output adjustable up to 45 V
350 kHz to 1 MHz adjustable operating frequency
Built-in soft start for boost converter
Drives up to eight LED current sources
LED current adjustable up to 30 mA for each channel
Headroom control to maximize efficiency
Adjustable output dimming frequency: 200 Hz to 10 kHz
LED open/short fault protection
Selectable brightness control interface modes
PWM input
SMBus serial interface
Selectable dimming controls
Fixed delay PWM dimming control with 8-bit resolution
No delay PWM dimming control with 8-bit resolution
Phase shift PWM dimming control with 8-bit resolution
Direct PWM dimming control
DC current dimming mode with 8-bit resolution
General
Thermal shutdown
Undervoltage lockout
28-lead, 4 mm × 4 mm LFCSP
APPLICATIONS
Notebook PCs, UMPCs, and monitor displays
GENERAL DESCRIPTION
The ADD5201 is a white LED driver for backlight applications
based on high efficiency, current mode, step-up converter tech-
nology. It is designed with a 0.15 Ω, 2.9 A internal switch and a
pin adjustable operating frequency between 350 kHz and 1 MHz.
The ADD5201 contains eight regulated current sources for
uniform brightness intensity. Each current source can be
driven up to 30 mA.
The ADD5201 drives up to eight parallel strings of multiple
series connected LEDs with a ±1.5% current regulation accuracy.
The device provides an adjustable LED driving current up to
30 mA for each channel by an external resistor. The ADD5201
provides various brightness control methods. The LED dimming
control can be achieved through SMBus and/or pulse-width
modulation (PWM) input. Each dimming mode is selectable
BLOCK DIAGRAM
STEP-UP SWITCHING REGULATOR
EIGHT CURRENT SOURCES
INTERFACE
8-BIT DIMMING CONTROL LOGIC
UNDERVOLTAGE LOCKOUT
SOFT START
THERMAL PROTECTION
OVERVOLTAGE PROTECTION
AUTODISABLE FOR LED OPEN/SHORT
Figure 1.
with two external dimming mode selection pins. The device pro-
vides a pin adjustable output dimming frequency range from
200 Hz to 10 kHz.
The ADD5201 operates over an input voltage range of 6 V to
21 V, but the device can function with a voltage as low as 5.4 V.
The ADD5201 has multiple safety protection features to prevent
damage during fault conditions. If any LED is open or short, the
device automatically disables the faulty current regulator. The
internal soft start prevents inrush current during startup. A
thermal shutdown protection prevents thermal damage.
The ADD5201 is available in a low profile, thermally enhanced,
4 mm × 4 mm × 0.75 mm, 28-lead, RoHS compliant lead frame
chip scale package (LFCSP) and is specified over the industrial
temperature range of −25°C to +85°C.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2012 Analog Devices, Inc. All rights reserved.
Free Datasheet http://www.Datasheet4U.com


ADD5201 데이터시트, 핀배열, 회로
ADD5201
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
Block Diagram .................................................................................. 1
General Description ......................................................................... 1
Revision History ............................................................................... 2
Functional Block Diagram .............................................................. 3
Specifications..................................................................................... 4
Step-Up Switching Regulator Specifications............................. 4
LED Current Regulation Specifications .................................... 4
SMBus Specifications ................................................................... 5
General Specifications ................................................................. 5
Absolute Maximum Ratings............................................................ 6
Thermal Resistance ...................................................................... 6
ESD Caution.................................................................................. 6
Pin Configuration and Function Descriptions............................. 7
Typical Performance Characteristics ............................................. 8
Theory of Operation ...................................................................... 10
REVISION HISTORY
4/12—Revision A: Initial Version
Data Sheet
Current Mode, Step-Up Switching Regulator Operation ..... 10
Internal 3.3 V Regulator ............................................................ 10
Boost Converter Switching Frequency.................................... 10
Dimming Frequency (fPWM) Adjustment................................. 10
Current Source............................................................................ 10
Backlight Brightness Control.................................................... 11
PWM Dimming Mode .............................................................. 11
DC Current Dimming Mode.................................................... 12
Safety Features ............................................................................ 12
SMBus Interface.......................................................................... 13
SMBus Register Description ..................................................... 14
External Component Selection Guide..................................... 16
Layout Guidelines....................................................................... 17
Typical Application Circuits ......................................................... 18
Outline Dimensions ....................................................................... 20
Ordering Guide............................................................................... 20
Rev. A | Page 2 of 20
Free Datasheet http://www.Datasheet4U.com




PDF 파일 내의 페이지 : 총 20 페이지

제조업체: Analog Devices

( analogs )

ADD5201 led

데이터시트 다운로드
:

[ ADD5201.PDF ]

[ ADD5201 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


ADD5201

White LED Driver - Analog Devices



ADD5203

White LED Driver with SMBus and PWM Input - Analog Devices



ADD5203

White LED Driver with SMBus and PWM Input - Analog Devices



ADD5205

Four-String White LED Driver - Analog Devices



ADD5207

White LED Driver - Analog Devices