|
Toshiba |
TLP1032(F), TLP1033A(F)
TOSHIBA Photointerrupter Infrared LED + Photo IC
TLP1032(F), TLP1033A(F)
Lead(Pb)-Free
Domestic electrical appliances such as VTRs and
CD players
Office equipment such as photocopiers, printers
and fax machines
Vending machines
Position detectors
The TLP1032(F)/TLP1033A(F) is a high-withstanding-voltage
photo-interrupter for digital output. The device combines a
high-optical-output GaAs infrared LED with a high-sensitivity,
high-gain Si photo-IC. The photo-IC, which supports a wide range of
systems (3.3 V to 12 V), enables the device to consume less power
than conventional devices. The device also features a narrow slit
width and high resolution.
The short lead package allows automatic mounting.
• Designed for direct mounting on printed circuit boards
(positioning pins included)
• The short lead package allows automatic mounting:
Lead length of 3.4 ± 0.3 mm
• Permissible board thickness: 1.6 mm or less
• Gap: 5 mm
• Resolution: Slit width of 0.5 mm
• Digital output (open-collector)
TLP1032(F) : Low-level output at shielding
TLP1033A(F): High-level output at shielding
• Direct connection to logic IC
• Power supply voltage: VCC = 2.7 V~15 V
• High-speed response
• Detector impermeable to visible light
• Package material: Polybutylene-terephthalate (UL94V-0, black)
TOSHIBA
Weight: 0.6 g (typ.)
11-14G1
1 2007-10-01
Free Datasheet http://www.datasheet4u.com/
TLP1032(F), TLP1033A(F)
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
Forward current
Forward current derating
(Ta > 25°C)
(Ta > 85°C)
Reverse voltage
Supply voltage
Output voltage
Low-level output current (Ta = Topr)
Operating temperature
Storage temperature
Soldering temperature (5 s)
(Note 1)
IF
ΔIF/°C
VR
VCC
VO
IOL
Topr
Tstg
Tsol
50
−0.33
−2
5
15
15
16
−30~95
−40~100
260
mA
mA/°C
V
V
V
mA
°C
°C
°C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Soldering is performed 1.5 mm from the bottom of the package.
Operating Ranges
Characteristic
Symbol
Min Typ. Max Unit
LED forward current
Supply voltage
Output voltage
Low-level output current
Operating temperature
IF
VCC
VO
IOL
Topr
8
(Note 2)
⎯
20 mA
2.7 3.3 13.2 V
⎯
⎯ 13.2
V
⎯ ⎯ 16 mA
−25 ⎯ 95 °C
Note 2: The value 8 mA allows for a 50% optical fluctuation in the LED. The initial value of the threshold input
current is 4 mA or less.
2 2007-10-01
|