|
OPTEK Technologies |
www.DataSheet4U.com
White PLCC2 Surface Mount LED
OVS9WBCR4
• High luminous intensity
• High efficiency
• Emission color: x = 0.315, y = 0.335
• Pb-free
Product Photo Here
The OVS9WBCR4 provides high intensity light from a surface mount package. Light output is optimized by an
interior reflector and the wide viewing angle adds flexibility for applications ranging from hand-held appliances to
automotive interiors.
Applications
• Backlighting of full color LCD
• Automotive interior lighting
• General lighting
• Coupling into light guides
• Entertainment equipment
Part Number
OVS9WBCR4
Material
InGaN
Emitted Color
White
Intensity Typ. mcd
750
Lens Color
Water Clear
[2.8]
.106
DIMENSIONS ARE IN:
[MILLIMETERS]
INCHES
RECOMMENDED SOLDER PADS
2X
[1.5]
RoHS Moisture - Level 2
[2.6]
[1.5]
DO NOT LOOK DIRECTLY
AT LED WITH UNSHIELDED
EYES OR DAMAGE TO
RETINA MAY OCCUR.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.1 11/06
Page 1 of 6
White PLCC2 Surface Mount LED
OVS9WBCR4
Absolute Maximum Ratings
TA = 25o C unless otherwise noted
Storage Temperature Range
Operating Temperature Range
Soldering Temperature (10 - 30 seconds maximum)
Reverse Voltage
Continuous Forward Current
Peak Forward Current (TP ≤ 10 µs, Duty Cycle = 0.005)
Electrostatic Discharge (ESD Threshold [HBM])
Power Dissipation (at room temperature)
LED Junction Temperature
-40 ~ +100°C
-40 ~ +100°C
260°C
5V
20 mA
200 mA
2000 V
85 mW
125°C
Electrical Characteristics
TA = 25o C unless otherwise noted
SYMBOL
PARAMETER
IV
VF
IR
2 Θ½
Luminous Intensity
Forward Voltage
Reverse Current
50% Power Angle
Chromaticity
Coordinates
x
y
MIN TYP MAX UNITS
560 750 1125 mcd
2.9 3.2 3.8
V
---- ---- 10 µA
---- 120 ----
---- 0.3150 ----
deg
----
---- 0.3354 ----
----
Standard Bins (IF = 20 mA)
Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x, y) bins shown.
Orders for OVS9WBCR4 may be filled with any or all bins contained as below.
CONDITIONS
IF = 20 mA
IF = 20 mA
VR = 5 V
IF = 20 mA
IF = 20 mA
IF = 20 mA
Luminous Intensity (mcd)
1125
900
715
560
V2
V1
U2
Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. Pb content <1000 PPM.
3. To designate luminous intensity ranks or chromaticity bins, please contact OPTEK.
4. Part is sensitive to static electricity and precautions must be used when handling products.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A .1 11/06
Page 2 of 6
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
|