|
OPTREX |
.comLCD Module Technical Specification
heet4UType No. T-51638D084J-FW-A-AB
First Edition
Oct 20, 2003
Final Revision
******
www.DataS Approved by (Quality Assurance Division)
Checked by (ACI Engineering Division)
omPrepared by (Module Coordination Group)
.cNo. Item
U-- CONTENTS
t41 OVERVIEW
e2 ABSOLUTE MAXIMUM RATINGS
e3 ELECTRICAL CHARACTERISTICS
h4 INTERFACE PIN CONNECTION
S5 INTERFACE TIMING
ta6 BLOCK DIAGRAM
7 MECHANICAL SPECIFICATION
a8 OPTICAL CHARACTERISTICS
.D9 RELIABILITY TEST CONDITION
10 INSPECTION STANDARDS
w11 HANDLING PRECAUTIONS FOR TFT-LCD MODULE
w-- PACKAGING SPECIFICATION
w-- PRODUCT NUMBER LABELING FORMS
m-- LAMP UNIT FOR 8.4” VGA
Page
1
2
3
3
6
7
10
11
13
15
16
17
20
24
26
www.DataSheet4U.coT-51638D084J-FW-A-AB (AB) No. 2003-0193
OPTREX CORPORATION
Page 1/32
1. OVERVIEW
T-51638D084J-FW-A-AB is 8.4” color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module
composed of LCD panel, driver ICs, control circuit, and backlight unit.
By applying 6 bit digital data, 640 × 480, 262,144-color images are displayed on the 8.4” diagonal
screen. Input power voltage is single 3.3V for LCD driving.
Inverter for backlight is not included in this module. General specifications are summarized in the
following table:
ITEM
SPECIFICATION
Display Area (mm)
Number of Dots
170.9(H) × 128.2 (V)
(8.4-inch diagonal)
640 × 3 (H) × 480 (V)
Pixel Pitch (mm)
0.267 (H) × 0.267 (V)
Color Pixel Arrangement
RGB vertical stripe
Display Mode
normally white
Number of Colors
262,144
Contrast ratio
450
Optimum Viewing Angle(Contrast ratio)
6 o’clock
Brightness (cd/m2)
450
Module Size (mm)
Module Mass (g)
199.5 (W) × 149.0 (H) × 11.5 (D)
360(Typ)
Backlight Unit
CCFL, 2-tubes, edge-light, replaceable
Surface Treatment
Anti-glare and hard-coating 3H
Characteristic value without any note is typical value.
The LCD product described in this specification is designed and manufactured for the standard use
in OA equipment and consumer products, such as computers, communication equipment, industrial
robots, AV equipment and so on.
Do not use the LCD product for the equipment that require the extreme high level of reliability,
such as aerospace applications, submarine cables, nuclear power control systems and medical or
other equipment for life support.
OPTREX assumes no responsibility for any damage resulting from the use of the LCD product in
disregard of the conditions and handling precautions in this specification.
If customers intend to use the LCD product for the above items or other no standard items,
please contact our sales persons in advance.
T-51638D084J-FW-A-AB (AB) No. 2003-0193
OPTREX CORPORATION
Page 2/32
|