|
OPTREX |
.comLCD Module Technical Specification
heet4UType No. T-51513D104JU-FW-A-AC
First Edition
Jun 18, 2003
Final Revision
******
www.DataS Approved by (Quality Assurance Division)
Checked by (ACI Engineering Division)
omPrepared by (Module Administration Group)
U.cNo. Item
t4-- CONTENTS
1 OVERVIEW
ee2 ABSOLUTE MAXIMUM RATINGS
h3 ELECTRICAL CHARACTERISTICS
4 INTERFACE PIN CONNECTION
taS5 INTERFACE TIMING
6 BLOCK DIAGRAM
a7 MECHANICAL SPECIFICATION
.D8 OPTICAL CHARACTERISTICS
9 RELIABILITY TEST CONDITION
w10 INSPECTION STANDARDS
w11 HANDLING PRECAUTIONS FOR TFT-LCD MODULE
w-- PACKAGING SPECIFICATION
Page
1
2
3
4
6
6
10
11
14
16
17
18
21
m-- PRODUCT NUMBER LABELING FORM
.co-- LAMP UNIT FOR 10.4” VGA
24
26
www.DataSheet4UT-51513D104JU-FW-A-AC (AC) No. 2003-0100
OPTREX CORPORATION
Page 1/31
1. OVERVIEW
T-51513D104JU-FW-A-AC is 10.4” color TFT-LCD (Thin Film Transistor Liquid Crystal Display)
module composed of LCD panel, driver ICs, control circuit, and backlight unit.
By applying 6 bit digital data 640 × 480, 260K-color images are displayed on the 10.4” diagonal screen.
Input power voltage is single 3.3 / 5.0V for LCD driving. Both 3.3V-CMOS and 5.0V-CMOS level
voltage are acceptable for logic input voltage.
Inverter for backlight is not included in this module. General specifications are summarized in the
following table:
ITEM
SPECIFICATION
Display Area (mm)
Number of Dots
211.2(H) × 158.4 (V)
(10.39-inch diagonal)
640 × 3 (H) × 480 (V)
Pixel Pitch (mm)
0.33 (H) × 0.33 (V)
Color Pixel Arrangement
RGB vertical stripe
Display Mode
normally white
Number of Color
260K
Wide Viewing Angle Technology
Optical compensation film
Optimum Viewing Angle(Contrast ratio)
12 o’clock
Brightness (cd/m2)
380
Module Size (mm)
Module Mass (g)
Backlight Unit
Surface Treatment
243.0 (W) × 181.6 (H) × 12.2 (D)
540
CCFL, 2-tubes, edge-light, replaceable
Anti-glare and hard-coating 3H
Sign"( )" is preliminary value. Characteristic value without any note is typical value.
The LCD product described in this specification is designed and manufactured for the standard use
in OA equipment and consumer products, such as computers, communication equipment, industrial
robots, AV equipment and so on.
Do not use the LCD product for the equipment that require the extreme high level of reliability,
such as aerospace applications, submarine cables, nuclear power control systems and medical or
other equipment for life support.
OPTREX assumes no responsibility for any damage resulting from the use of the LCD product in
disregard of the conditions and handling precautions in this specification.
If customers intend to use the LCD product for the above items or other no standard items,
please contact our sales persons in advance.
T-51513D104JU-FW-A-AC (AC) No. 2003-0100
OPTREX CORPORATION
Page 2/31
|