|
Diodes Incorporated |
Description
The AH3764Q is an AEC-Q100 qualified high-voltage, high-sensitivity
Hall-Effect latch IC designed for brushless DC-motor commutation,
speed measurement, angular or linear encoders and position sensors
in automotive applications. To support a wide range of demanding
applications, the design is optimized to operate over the supply range
of 3.0V to 28V. With chopper stabilized architecture and an internal
bandgap regulator to provide temperature compensated supply for
internal circuits, the AH3764Q provides a reliable solution over the
whole operating range. For robustness and protection, the device has
a reverse blocking diode with a Zener clamp on the supply. The
output has an over current limit and a Zener clamp.
AH3764Q
HIGH-VOLTAGE, HIGH-SENQSITIVITY
AUTOMOTIVE HALL-EFFECT LATCH
Pin Assignments
(Top View)
GND 2
3 OUTPUT
1 VDD
SC59 and SOT23
The single, open-drain output can be switched on with South pole of
sufficient strength and switched off with North pole of sufficient
strength. When the magnetic flux density (B) perpendicular to the
package is larger than the operate point (Bop) the output is switched
on (pulled low). The output is held latched until magnetic flux density
reverses and becomes lower than the release point (Brp).
The magnetic operating and release polarity is opposite for SOT23
and SC59 packages. SOT23 and SIP-3 packages will require south
pole to the part marking side to operate while SC59 will require south
pole to the non-part marking side.
(Top View)
SIP-3
3. OUTPUT
2. GND
1. VDD
Features
• Bipolar Latch Operation (South Pole: On, North Pole: off)
• High Sensitivity: Bop and Brp of +40G and -40G Typical
• Single Open-Drain Output with Overcurrent Limit
• 3.0V to 28V Operating Voltage Range
• Chopper Stabilized Design Provides
Superior Temperature Stability
Minimal Switch Point Drift
Enhanced Immunity to Stress
• Good RF Noise Immunity
• Reverse Blocking Diode
• Zener Clamp on Supply and Output Pins
• -40C to +150C Operating Temperature
• ESD: HBM >8kV, CDM: >2kV
• AEC-Q100 Grade 0 Qualified
• Industry Standard SC59, SOT23 and SIP-3 Packages
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Applications
• Brushless DC-Motor Commutation
• Revolution Per Minute (RPM) Measurement
• Angular and Linear Encoder and Position Sensing and Indexing
• Flow Meters
• Contactless Commutation, Speed Measurement and Angular
Position Sensing/Indexing in Automotive Applications
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and <1000ppm antimony compounds.
AH3764Q
Document number: DS38073 Rev. 2 - 2
1 of 15
www.diodes.com
July 2015
© Diodes Incorporated
Typical Applications Circuit
3.0V to 28V
VDD
AH3764Q
Q
RL
OUTPUT
CIN AH3764Q
GND
Note:
4. CIN is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 10nF ~ 100nF. RL is the pull-up resistor.
Pin Descriptions
Package: SC59, SOT23 and SIP-3
Pin Number
1
2
3
Pin Name
VDD
GND
OUTPUT
Power Supply Input
Ground
Output Pin
Function
Functional Block Diagram
VDD
Power
switch
To All Subcircuits
Amp
Amp
Control
OUTPUT
Current
Limit
GND
AH3764Q
Document number: DS38073 Rev. 2 - 2
2 of 15
www.diodes.com
July 2015
© Diodes Incorporated
|