|
|
Número de pieza | ME3215-104KLC | |
Descripción | SMT Power Inductors | |
Fabricantes | Coilcraft | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ME3215-104KLC (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Document 432 -1
SMT Power Inductors– ME3215
• Low profile, small footprint power inductor
• 2.5 × 3.2 mm footprint; 1.55 mm tall
Designer’s Kit C408 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant tin-silver over tin over nickel over
silver. Other terminations available at additional cost.
Weight 46 – 48 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 2000/7″ reel; 7000/13″ reel Plastic tape: 12 mm wide,
0.25 mm thick, 4 mm pocket spacing, 2.25 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
DCR SRF Isat (A)5 I rms (A)6
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
Part number1 (µH) (Ohms) (MHz) drop drop drop rise rise
ME3215-102ML_ 1.0 ±20% 0.058 100
ME3215-222ML_ 2.2 ±20% 0.107 64
ME3215-332ML_ 3.3 ±20% 0.170 55
ME3215-472ML_ 4.7 ±20% 0.245 43
ME3215-103KL_ 10 ±10% 0.505 26
2.32 2.62 2.80 1.70 2.30
1.62 1.84 2.00 1.30 1.70
1.22 1.40 1.50 1.05 1.45
1.06 1.20 1.30 0.83 1.14
0.71 0.81 0.85 0.60 0.79
ME3215-153KL_ 15 ±10%
ME3215-223KL_ 22 ±10%
ME3215-333KL_ 33 ±10%
ME3215-473KL_ 47 ±10%
ME3215-683KL_ 68 ±10%
0.773
1.00
1.48
2.33
3.40
26 0.58 0.65 0.70 0.48 0.65
19 0.50 0.57 0.61 0.42 0.56
17 0.42 0.47 0.51 0.35 0.48
15 0.33 0.38 0.41 0.35 0.48
12 0.28 0.31 0.34 0.24 0.32
ME3215-104KL_ 100 ±10% 4.67 10 0.23 0.26 0.27 0.18 0.25
1. Please specify termination and packaging codes:
ME3215-104KLC
Termination: L = RoHS tin-silver over tin over nickel
over silver.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481
embossed plastic tape (2000 per full
reel).
B = Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D = 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory order
only, not stocked (7000 parts per full
reel).
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc us-
ing Coilcraft SMD‑A fixture in Agilent/HP 4284A imped-
ance analyzer.
3. DCR measured on a micro-ohmmeter and Coilcraft
CCF858 test fixture.
4. SRF measured using Agilent/HP 8753D network ana-
lyzer and Coilcraft SMD‑D test fixture.
5. DC current at which the inductance drops the specified
amount from its value without current.
6. Current that causes the specified temperature rise from
25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 432-1 Revised 02/17/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet ME3215-104KLC.PDF ] |
Número de pieza | Descripción | Fabricantes |
ME3215-104KLB | SMT Power Inductors | Coilcraft |
ME3215-104KLC | SMT Power Inductors | Coilcraft |
ME3215-104KLD | SMT Power Inductors | Coilcraft |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |