파트넘버.co.kr KK74AC151 데이터시트 PDF


KK74AC151 반도체 회로 부품 판매점

8-Input Data Selector/Multiplexer High-Speed Silicon-Gate CMOS



KODENSHI KOREA 로고
KODENSHI KOREA
KK74AC151 데이터시트, 핀배열, 회로
TECHNICAL DATA
www.DataSheet4U.com
8-Input Data Selector/Multiplexer
High-Speed Silicon-Gate CMOS
KK74AC151
The KK74AC151 is identical in pinout to the LS/ALS151,
HC/HCT151. The device inputs are compatible with standard CMOS
outputs; with pullup resistors, they are compatible with LS/ALS outputs.
The device selects one of the eight binary Data Inputs, as determined
by the Address Inputs. The Strobe pin must be at a low level for the
selected data to appear at the outputs. If Strobe is high, the Y output is
forced to a low level and the Y output is forced to a high level.
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 2.0 to 6.0 V
Low Input Current: 1.0 µA; 0.1 µA @ 25°C
High Noise Immunity Characteristic of CMOS Devices
Outputs Source/Sink 24 mA
ORDERING INFORMATION
KK74AC151N Plastic
KK74AC151D SOIC
TA = -40° to 85° C for all packages
LOGIC DIAGRAM
PIN ASSIGNMENT
PIN 16 =VCC
PIN 8 = GND
FUNCTION TABLE
Inputs
Outputs
A2 A1 A0 Strobe Y Y
XX X H L H
LL L
L D0 D0
LL H
L D1 D1
LH L
L D2 D2
LH H
L D3 D3
HL L
L D4 D4
HL H
L D5 D5
HH L
L D6 D6
HH H
L D7 D7
D0,D1...D7=the level of the respective D
input
X = don’t care
1


KK74AC151 데이터시트, 핀배열, 회로
KK74AC151
www.DataSheet4U.com
MAXIMUM RATINGS*
Symbol
Parameter
Value
VCC
VIN
VOUT
IIN
IOUT
ICC
PD
DC Supply Voltage (Referenced to GND)
DC Input Voltage (Referenced to GND)
DC Output Voltage (Referenced to GND)
DC Input Current, per Pin
DC Output Sink/Source Current, per Pin
DC Supply Current, VCC and GND Pins
Power Dissipation in Still Air, Plastic DIP+
SOIC Package+
-0.5 to +7.0
-0.5 to VCC +0.5
-0.5 to VCC +0.5
±20
±50
±50
750
500
Tstg Storage Temperature
-65 to +150
TL Lead Temperature, 1 mm from Case for 10 Seconds
(Plastic DIP or SOIC Package)
260
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOIC Package: : - 7 mW/°C from 65° to 125°C
Unit
V
V
V
mA
mA
mA
mW
°C
°C
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
VCC
VIN, VOUT
DC Supply Voltage (Referenced to GND)
DC Input Voltage, Output Voltage (Referenced to GND)
TJ Junction Temperature (PDIP)
TA Operating Temperature, All Package Types
IOH Output Current - High
IOL Output Current - Low
tr, tf Input Rise and Fall Time *
(except Schmitt Inputs)
* VIN from 30% to 70% VCC
VCC =3.0 V
VCC =4.5 V
VCC =5.5 V
Min Max Unit
2.0 6.0
V
0 VCC V
140 °C
-40 +85 °C
-24 mA
24 mA
0 150 ns/V
0 40
0 25
This device contains protection circuitry to guard against damage due to high static voltages or electric fields.
However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this
high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND(VIN or
VOUT)VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused
outputs must be left open.
2




PDF 파일 내의 페이지 : 총 6 페이지

제조업체: KODENSHI KOREA

( kodenshi )

KK74AC151 gate

데이터시트 다운로드
:

[ KK74AC151.PDF ]

[ KK74AC151 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


KK74AC151

8-Input Data Selector/Multiplexer High-Speed Silicon-Gate CMOS - KODENSHI KOREA



KK74AC153

Dual 4-Input Data Selector/Multiplexer High-Speed Silicon-Gate CMOS - KODENSHI KOREA



KK74AC157

Quad 2-Input Data Selector/Multiplexer High-Speed Silicon-Gate CMOS - KODENSHI KOREA



KK74AC158

Quad 2-Input Data Selector/Multiplexer High-Speed Silicon-Gate CMOS - KODENSHI KOREA