|
|
Número de pieza | 74LVTH16374 | |
Descripción | Low Voltage 16-Bit D-Type Flip-Flop with 3-STATE Outputs | |
Fabricantes | Fairchild Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 74LVTH16374 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! January 1999
Revised April 1999
74LVT16374 • 74LVTH16374
Low Voltage 16-Bit D-Type Flip-Flop with
3-STATE Outputs
General Description
The LVT16374 and LVTH16374 contain sixteen non-invert-
ing D-type flip-flops with 3-STATE outputs and is intended
for bus oriented applications. The device is byte controlled.
A buffered clock (CP) and Output Enable (OE) are com-
mon to each byte and can be shorted together for full 16-bit
operation.
The LVTH16374 data inputs include bushold, eliminating
the need for external pull-up resistors to hold unused
inputs.
These flip-flops are designed for low-voltage (3.3V) VCC
applications, but with the capability to provide a TTL inter-
face to a 5V environment. The LVT16374 and LVTH16374
are fabricated with an advanced BiCMOS technology to
achieve high speed operation similar to 5V ABT while
maintaining a low power dissipation.
Features
s Input and output interface capability to systems at 5V
VCC
s Bushold data inputs eliminate the need for external pull-
up resistors to hold unused inputs (74LVTH16374), also
available without bushold feature (74LVT16374).
s Live insertion/extraction permitted
s Power Up/Down high impedance provides glitch-free
bus loading
s Outputs source/sink −32 mA/+64 mA
Ordering Code:
Order Number
Package
Number
Package Description
74LVT16374MEA
MS48A
48-Lead Small Shrink Outline Package (SSOP), JEDEC MO-118, 0.300” Wide
74LVT16374MTD
MTD48
48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide
74LVTH16374MEA
MS48A
48-Lead Small Shrink Outline Package (SSOP), JEDEC MO-118, 0.300” Wide
74LVTH16374MTD
MTD48
48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
Logic Symbol
© 1999 Fairchild Semiconductor Corporation DS012022.prf
www.fairchildsemi.com
1 page DC Electrical Characteristics (Continued)
Symbol
Parameter
IOZH+
ICCH
ICCL
ICCZ
ICCZ+
3-STATE Output Leakage Current
Power Supply Current
Power Supply Current
Power Supply Current
Power Supply Current
T A = −40°C to +85°C
VCC
(V)
Min
Typ Max Units
(Note 3)
3.6 10 µA
3.6 0.19 mA
3.6 5 mA
3.6 0.19 mA
3.6 0.19 mA
∆ICC
Increase in Power Supply Current
(Note 7)
3.6
0.2 mA
Note 3: All typical values are at VCC = 3.3V, TA = 25°C.
Note 4: Applies to bushold versions only (74LVTH16374).
Note 5: An external driver must source at least the specified current to switch from LOW to HIGH.
Note 6: An external driver must sink at least the specified current to switch from HIGH to LOW.
Note 7: This is the increase in supply current for each input that is at the specified voltage level rather than VCC or GND.
Conditions
VCC < VO ≤ 5.5V
Outputs High
Outputs Low
Outputs Disabled
VCC ≤ VO ≤ 5.5V,
Outputs Disabled
One Input at VCC − 0.6V
Other Inputs at VCC or GND
Dynamic Switching Characteristics (Note 8)
Symbol
Parameter
VCC TA = 25°C
(V) Min Typ
VOLP
Quiet Output Maximum Dynamic VOL
3.3
0.8
VOLV
Quiet Output Minimum Dynamic VOL
3.3
−0.8
Note 8: Characterized in SSOP package. Guaranteed parameter, but not tested.
Note 9: Max number of outputs defined as (n). n−1 data inputs are driven 0V to 3V. Output under test held LOW.
Max
Units
V
V
Conditions
CL = 50 pF,
RL = 500Ω
(Note 9)
(Note 9)
AC Electrical Characteristics
TA = −40°C to +85°C
CL = 50 pF, RL = 500Ω
Symbol
Parameter
VCC = 3.3V ±0.3V
VCC = 2.7V
Units
Min
Typ
(Note 10)
Max
Min
Max
fmax Maximum Clock Frequency
160
160 MHz
tPHL Propagation Delay
tPLH
CP to On
1.9 4.3 1.9 4.6
ns
1.6 4.5 1.6 5.2
tPZL
tPZH
Output Enable Time
1.3 4.4 1.3 5.0
ns
1.0 4.5 1.0 5.4
tPLZ
tPHZ
Output Disable Time
1.5 4.6 1.5 4.8
ns
2.0 5.0 2.0 5.4
tS Setup Time
1.8 2.0 ns
tH Hold Time
0.8 0.1 ns
tW Pulse Width
3.0 3.0 ns
tOSHL
tOSLH
Output to Output Skew (Note 11)
1.0 1.0
ns
1.0 1.0
Note 10: All typical values are at VCC = 3.3V, TA = 25°C.
Note 11: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The
specification applies to any outputs switching in the same direction, either HIGH to LOW (tOSHL) or LOW to HIGH (tOSLH).
Capacitance (Note 12)
Symbol
Parameter
Conditions
CIN Input Capacitance
VCC = Open, VI = 0V or VCC
COUT
Output Capacitance
VCC = 3.0V, VO = 0V or VCC
Note 12: Capacitance is measured at frequency f = 1 MHz, per MIL-STD-883, Method 3012.
Typical
4
8
Units
pF
pF
5 www.fairchildsemi.com
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet 74LVTH16374.PDF ] |
Número de pieza | Descripción | Fabricantes |
74LVTH16373 | Low Voltage 16-Bit Transparent Latch with 3-STATE Outputs | Fairchild Semiconductor |
74LVTH16373MEA | Low Voltage 16-Bit Transparent Latch with 3-STATE Outputs | Fairchild Semiconductor |
74LVTH16373MTD | Low Voltage 16-Bit Transparent Latch with 3-STATE Outputs | Fairchild Semiconductor |
74LVTH16374 | Low Voltage 16-Bit D-Type Flip-Flop with 3-STATE Outputs | Fairchild Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |