|
|
Número de pieza | RF3619D | |
Descripción | SAW Filter | |
Fabricantes | RF Monolithics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de RF3619D (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
No Preview Available ! RF3619D
• 402 to 405 MHz Medical Band Front-end Filter
• Single-ended Input/Outout Operation
• Complies with Directive 2002/95/EC (RoHS) Pb
Absolute Maximum Ratings
Rating
Input Power Level
DC Voltage on any Non-ground Pin
Operating Temperature Range
Storage Temperature Range in Tape and Reel
Solder Reflow Temperature, 10 seconds, 5 cycles maximum
Electrical Characteristics
Characteristic
Center Frequency at 25 °C
Insertion Loss
Passband Ripple, 402-405 MHz
3 dB Bandwidth
Attenuation relative to ILMIN:
398.5 MHz
408.5 MHz
383.5 MHz
423.5 MHz
Freq. Temp. Coefficient
Frequency Aging, First Year
Single-ended Input/Output Impedance Match
Differential Input/Output Impedance Match
Lid Symbolization (Y=year WW=week S=shift)
Standard Reel Quantity
Reel Size 7 Inch
Reel Size 13 Inch
404.0 MHz
SAW Filter
Value
+10
3
-10 to +60
-40 to +85
260
Units
dBm
V
°C
°C
°C
SM3838-8 Case
3.8 x 3.8
Sym
fc
ILMIN
BW3
Notes
1, 2, 3
1, 3
1, 3
1
www.DataSheet.net/
1, 3
FTC
|fA| 5
1
1
9
Minimum
5.0
Typical
404.0
2.1
0.6
6.0
Maximum
2.3
0.8
Units
MHz
dB
dB
MHz
30 35
25 45
40 50
38 48
-37
10
50
150
A15, YWWS
500 Pieces/Reel
3000 Pieces/Reel
dB
ppm/k
ppm
ohms
ohms
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture which is connected to a 50 test system.
2. The frequency fc is defined as the midpoint between the 3 dB frequencies.
3. Where noted specifications apply over the entire specified operating temperature range of -10 °C to +60 °C.
4. Frequency aging is the change in fc with time and is specified at +65 °C or less. Aging may exceed the specification for prolonged temperatures
above +65 °C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years.
5. The design, manufacturing process, and specifications of this device are subject to change.
6. One or more of the following U.S. Patents apply: 4,54,488, 4,616,197, and others pending.
7. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale.
8. Tape and Reel Standard Per ANSI / EIA 481.
9. This product complies with Directive 2002/95/EC of the European Parlament and of the Council of 27 January 2003 on the restriction of the use of
certain hazadous substances in electrical and electronic equipment.
www.RFM.com E-mail: [email protected]
© 2011-2012 by RF Monolithics, Inc.
Page 1 of 3
RF3619D - 5/10/12
Datasheet pdf - http://www.DataSheet4U.co.kr/
1 page |
Páginas | Total 3 Páginas | |
PDF Descargar | [ Datasheet RF3619D.PDF ] |
Número de pieza | Descripción | Fabricantes |
RF3619D | SAW Filter | RF Monolithics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |