|
TriQuint Semiconductor |
856731
192 MHz SAW Filter
Applications
General Purpose Wireless
Wireless Infrastructure
3G, 4G, Multistandard
Functional Block Diagram SE/Bal
Top view
Gnd Gnd Gnd
Input 10
98 7
6 Output -
Gnd 11
5 Gnd
Gnd 12
12 3
4 Output +
Product Features
Usable bandwidth 60 MHz
Low loss
High attenuation
Low EVM
Single-Balanced or Single-Single ended operation
Ceramic Surface Mount Package (SMP)
Small Size: 7.01 x 5.51 x 1.70 mm
Hermetic RoHS compliant, Pb-free
Functional Block Diagram SE/SE
Top view
Gnd Gnd Gnd
Input 10
98 7
6 Gnd
Gnd 11
5 Gnd
Gnd 12
12 3
4 Output
Gnd Gnd Gnd
Pin Configuration
Pin # SE/SE
Description
10
www.DataSheet.net/
4
6
1,2,3,5,7,8,9,11,12
Input
Output
Ground
Case Ground
Pin # SE/BAL
10
4
6
1,2,3,5,7,8,9,11,12
Description
Input
Output +
Output -
Case Ground
General Description
The 856731 is a high performance IF SAW filter developed
for 4G and Multistandard infrastructure applications.
It features low loss coupled with excellent attenuation, and is
designed to be used with multiple impedance values and
configurations. The filter is developed for excellent in-band
characteristics in order to minimize system bit-error rates.
This device is RoHS compliant and Pb-free.
Ordering Information
Part No.
Description
856731
packaged part
856731-EVB
evaluation board
Standard T/R size = 3000 units/reel.
Data Sheet: Rev A 12/08/11
© 2011 TriQuint Semiconductor, Inc.
- 1 of 8 -
Disclaimer: Subject to change without notice e
Connecting the Digital World to the Global Network ®
Datasheet pdf - http://www.DataSheet4U.co.kr/
856731
192 MHz SAW Filter
Specifications
Electrical Specifications (1, 2)
Specified Temperature Range: (3) -40 to +85 ºC
Parameter (4)
Conditions
Min Typical (5) Max Units
Center Frequency
- 192 - MHz
Insertion Loss
Lower 3dB Bandedge (7)
Upper 3dB Bandedge (7)
Amplitude Variation (6)
at 192 MHz
162 – 222 MHz
-
-
223.3
-
13.5
156.2
227.9
.5
14.5
160.7
-
1.0
dB
MHz
MHz
dB p-p
Group Delay Variation (6)
Relative Attenuation (7)
Input/Output Return Loss
Source Impedance (SE) (8)
Load Impedance (SE) (8)
Load Impedance (Bal) (8)
162 – 222 MHz
10.0 – 105 MHz
105 – 132 MHz
132 – 148 MHz
238.5 – 245 MHz
245 – 300 MHz
300 – 455 MHz
455 – 555 MHz
555 – 705 MHz
705 – 1000 MHz
162 – 222 MHz
- 46 70 ns p-p
45 53
- dB
40 44
- dB
38 42
- dB
40 45
- dB
40 49
- dB
45 56
- dB
43 46
- dB
50 55
- dB
60 71
- dB
4.0 5
- dB
- 50 -
- 50 -
- 150 -
Notes:
1. All specifications are based on the TriQuint schematic for the main referencewww.DataSheet.net/ designs shown on page 3 and 5
2. An external impedance matching network with ±2% tolerance will be necessary to achieve the proposed specifications
3. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature
4. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
5. Typical values are based on average measurements at room temperature
6. These Variations are defined as the difference between the lowest loss and the highest loss within the defined frequency points
7. Relative to insertion loss at center frequency
8. This is the optimum impedance in order to achieve the performance shown
Absolute Maximum Ratings
Parameter
Operating Temperature
Storage Temperature
Input Power (at +55 C for > 29,500 hours max)
Rating
-40 to +85 oC
-40 to +85 oC
+15 dBm
Operation of this device outside the parameter ranges given above may cause permanent damage.
Data Sheet: Rev A 12/08/11
© 2011 TriQuint Semiconductor, Inc.
- 2 of 8 -
Disclaimer: Subject to change without notice e
Connecting the Digital World to the Global Network ®
Datasheet pdf - http://www.DataSheet4U.co.kr/
|