|
|
PDF RF1172 Data sheet ( Hoja de datos )
| Número de pieza | RF1172 | |
| Descripción | 433.92 MHz SAW Filter | |
| Fabricantes | RF Monolithics Inc | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de RF1172 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
®
• Ideal Front-End Filter for European Wireless Receivers
• Low-Loss, Coupled-Resonator Quartz Design
• Simple External Impedance Matching
• Rugged TO39 Hermetic Package
The RF1172 is a low-loss, compact and economical surface-acoustic-wave (SAW) filter designed to provide
front-end selectivity in 433.92 MHz receivers. Receiver designs using this filter include superhet with
10.7 MHz or 500 kHz IF, direct conversion and superregen. Typical applications of these receivers are wire-
less remote-control and security devices operating in Europe under ETSI I-ETS 300 220.
This coupled-resonator filter (CRF) uses selective null placement to provide suppression, typically greater
than 40 dB, of the LO and image spurious responses of superhet receivers with 10.7 MHz IF. RFM’s
advanced SAW design and fabrication technology is utilized to achieve high performance and very low loss
with simple external impedance matching (not included). Quartz construction provides excellent frequency
stability over a wide temperature range.
RF1172
433.92 MHz
SAW Filter
TO39-3 Case
Electrical Characteristics
Characteristic
Center Frequency at 25°C
Insertion Loss
3 dB Bandwidth
Rejection
Temperature
Absolute Frequency
Tolerance from 433.92 MHz
at fc - 21.4 MHz (Image)
at fc - 10.7 MHz (LO)
Ultimate
Operating Case Temp.
Turnover Temperature
Turnover Frequency
Freq. Temp. Coefficient
Frequency Aging
Absolute Value during the First Year
External Impedance
Series Inductance
Shunt Capacitance
Lid Symbolization (in addition to Lot and/or Date Codes)
Sym
fc
∆fC
IL
BW3
TC
TO
fO
FTC
|fA|
L
C
Notes
1, 2
1
1, 2
1
3, 4
5
1
Minimum
Typical
433.92
3.0
500 600
40 50
15 30
80
-40
15 25
fc
0.032
≤10
47
11
RFM RF1172
Maximum
±80
5.0
800
Units
MHz
kHz
dB
kHz
dB
+85 °C
35 °C
MHz
ppm/°C2
ppm/yr
nH
pF
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture which is connected to a 50 Ω test system with
VSWR ≤ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fc. Note that insertion loss, bandwidth,
and passband shape are dependent on the impedance matching component values and quality.
2. The frequency fc is defined as the midpoint between the 3dB frequencies.
3. Where noted, specifications apply over the entire specified operating temperature range.
4. The turnover temperature, TO, is the temperature of maximum (or turnover) frequency, fo. The nominal frequency at any case temperature, Tc, may
be calculated from: f = fo [1 - FTC (To - Tc)2].
5. Frequency aging is the change in fc with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures
above +65°C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years.
6. The design, manufacturing process, and specifications of this device are subject to change without notice.
7. One or more of the following U.S. Patents apply: 4,54,488, 4,616,197, and others pending.
8. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale.
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
RF1172-102401
Page 1 of 2
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet RF1172.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| RF1171 | 418.0 MHz SAW Filter |  RF Monolithics |
| RF1171D | SAW Filter |  RMF |
| RF1172 | 433.92 MHz SAW Filter | RF Monolithics Inc |
| RF1172C | SAW Filter | RMF |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |