|
|
PDF FN3440 Data sheet ( Hoja de datos )
| Número de pieza | FN3440 | |
| Descripción | Passive Harmonic Filters | |
| Fabricantes | Schaffner | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de FN3440 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
DATASHEET ECOsine Passive FN 3440
ECOsine® 50 Hz, IP 00, Passive Harmonic Filters
The industry standard for 6-pulse rectifiers and
motor drives
The most compact 5% THID filter available
Open Frame Filters (IP 00)
Excellent behavior under partial load
conditions
Filters for diode and thyristor rectifiers without
DC-link choke
Technical specifications
Nominal operating voltage
Nominal motor drive input current rating
Operating frequency
Total harmonic current distortion THID*
Total demand distortion TDD
Efficiency
High potential test voltage
Protection category
Cooling
Overload capability
Ambient temperature range
Design corresponding to
Flammability corresponding to
MTBF @ 45°C/415 V (Mil-HB-217F)
Earthing System
3 x 380 VAC to 415 VAC ±10%
1.1 to 200 kW
50 Hz ±1 Hz
<5% at rated power
According to IEEE 519
>98.5% for rated voltage and power
P –> E 2160 VAC (1 s)
IP 00
External cooling**
1.6x rated current for 1 minute, once per hour
–25°C to +45°C fully operational
–25°C to +88°C transport and storage
+45°C to +70°C derated operation***
Filter: UL 61800-5-1, EN 61800-5-1
Chokes: EN 61558-2-20 or EN 60076-6
UL 94 V-2
>200,000 hours
TN, TT, IT
****System requirements: THVD <2%, line voltage unbalance <1%
****Note: performance specifications in this brochure refer to six-pulse diode rectifiers.
****SCR rectifier front-ends will produce different results, dependent upon the firing angle of the thyristors.
****Please check the air cooling requirements' table on page 3 of this document.
****I_derated = I_nom*sqrt((70°C-Tamb)/25°C)
Approvals
Features and benefits
Schaffner ECOsine harmonic filters represent an
economical solution to the challenge of load-applied
harmonics mitigation in three-phase power systems.
With a plug-and-play approach and more compact
dimensions than comparable products, they can be
quickly installed and easily commissioned. They
increase the reliability and service life of electric
installations, help utilize electric sytem capacity
better, and are the key to meet Power Quality
standards such as IEEE 519. ECOsine filters reshape
your distorted current back to the desired sinusoidal
waveform. Schaffner ECOsine filters can be applied to
virtually any kind of power electronics with front-end
six-pulse rectifiers, 3-phase diode or thyristor bridges,
where harmonic current distortion needs to be
reduced to defined limits.
Typical applications
Equipment with front-end six-pulse rectifier
Motor drives
Factory automation equipment
Water/wastewater treatment facilities
Fan and pump applications
HVAC installations
Mission-critical processes
DC fast chargers
Typical electrical schematic
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet FN3440.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| FN3440 | Passive Harmonic Filters | Schaffner |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |