DataSheet.es    


PDF 74AVC16836A Data sheet ( Hoja de datos )

Número de pieza 74AVC16836A
Descripción 20-bit registered driver
Fabricantes NXP Semiconductors 
Logotipo NXP Semiconductors Logotipo



Hay una vista previa y un enlace de descarga de 74AVC16836A (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! 74AVC16836A Hoja de datos, Descripción, Manual

www.DataSheet4U.com
INTEGRATED CIRCUITS
74AVC16836A
20-bit registered driver with inverted
register enable and
Dynamic Controlled Outputs(3-State)
Product data
Supersedes data of 2000 Aug 03
2002 Aug 02
Philips
Semiconductors

1 page




74AVC16836A pdf
Philips Semiconductors
20-bit registered driver with inverted register enable
and Dynamic Controlled Outputs(3-State)
Product data
74AVC16836A
DC ELECTRICAL CHARACTERISTICS
Over recommended operating conditions. Voltage are referenced to GND (ground = 0 V).
SYMBOL
PARAMETER
TEST CONDITIONS
VIH HIGH level Input voltage
VIL LOW level Input voltage
VOH HIGH level output voltage
VOL LOW level output voltage
II Input leakage current
IOFF 3-State output OFF-state current
IOZ 3-State output OFF-state current
ICC Quiescent supply current
NOTE:
1. All typical values are at Tamb = 25 °C.
VCC = 1.2 V
VCC = 1.65 to 1.95 V
VCC = 2.3 to 2.7 V
VCC = 3.0 to 3.6 V
VCC = 1.2 V
VCC = 1.65 to 1.95 V
VCC = 2.3 to 2.7 V
VCC = 3.0 to 3.6 V
VCC = 1.65 to 3.6 V; VI = VIH or VIL;
IO = –100 µA
VCC = 1.65 V; VI = VIH or VIL; IO = –4 mA
VCC = 2.3 V; VI = VIH or VIL; IO = –8 mA
VCC = 3.0 V; VI = VIH or VIL; IO = –12 mA
VCC = 1.65 to 3.6 V; VI = VIH or VIL;
IO = 100 µA
VCC = 1.65 V; VI = VIH or VIL; IO = 4 mA
VCC = 2.3 V; VI = VIH or VIL; IO = 8 mA
VCC = 3.0 V; VI = VIH or VIL; IO = 12 mA
VCC = 3.6 V;
VI = VCC or GND
VCC = 0 V; VI or VO = 3.6 V
VCC = 1.65 to 2.7 V; VI = VIH or VIL;
VO = VCC or GND
VCC = 3.0 to 3.6 V; VI = VIH or VIL;
VO = VCC or GND
VCC = 1.65 to 2.7 V; VI = VCC or GND; IO = 0
VCC = 3.0 to 3.6 V; VI = VCC or GND; IO = 0
LIMITS
Temp = -40°C to +85°C
MIN
TYP1
MAX
VCC
0.65VCC
1.7
0.9
1.2
2.0 1.5 –
– – GND
– 0.9 0.35VCC
– 1.2 0.7
– 1.5 0.8
UNIT
V
V
VCC*0.20
VCC
VCC*0.45
VCC*0.55
VCC*0.70
VCC*0.10
VCC*0.28
VCC*0.32
– GND
0.20
V
– 0.10 0.45 V
– 0.26 0.55
– 0.36 0.70
– 0.1 2.5 µA
0.1
"10
µA
– 0.1 5
µA
– 0.1 10
– 0.1 20
µA
– 0.2 40
2002 Aug 02
5

5 Page





74AVC16836A arduino
Philips Semiconductors
20-bit registered driver with inverted register enable
and Dynamic Controlled Outputs(3-State)
Product data
74AVC16836A
Data sheet status
Data sheet status [1]
Product
status [2]
Definitions
Objective data
Development This data sheet contains data from the objective specification for product development.
Philips Semiconductors reserves the right to change the specification in any manner without notice.
Preliminary data
Qualification
This data sheet contains data from the preliminary specification. Supplementary data will be
published at a later date. Philips Semiconductors reserves the right to change the specification
without notice, in order to improve the design and supply the best possible product.
Product data
Production
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply.
Changes will be communicated according to the Customer Product/Process Change Notification
(CPCN) procedure SNW-SQ-650A.
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL
http://www.semiconductors.philips.com.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
Contact information
For additional information please visit
http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
For sales offices addresses send e-mail to:
© Koninklijke Philips Electronics N.V. 2002
All rights reserved. Printed in U.S.A.
Document order number:
Date of release: 08-02
9397 750 10178
Philips
Semiconductors
2002 Aug 02
11

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet 74AVC16836A.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
74AVC1683620-bit registered driver with inverted register enable 3-StateNXP Semiconductors
NXP Semiconductors
74AVC16836A20-bit registered driverNXP Semiconductors
NXP Semiconductors
74AVC16836DGG20-bit registered driver with inverted register enable 3-StateNXP Semiconductors
NXP Semiconductors

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar