파트넘버.co.kr 74LVC1G126 데이터시트 PDF


74LVC1G126 반도체 회로 부품 판매점

Bus buffer/line driver; 3-state



NXP Semiconductors 로고
NXP Semiconductors
74LVC1G126 데이터시트, 핀배열, 회로
INTEGRATED CIRCUITS
DATA SHEET
74LVC1G126
Bus buffer/line driver; 3-state
Product specification
Supersedes data of 2002 Oct 02
2004 Sep 21


74LVC1G126 데이터시트, 핀배열, 회로
Philips Semiconductors
Bus buffer/line driver; 3-state
Product specification
74LVC1G126
FEATURES
Wide supply voltage range from 1.65 V to 5.5 V
High noise immunity
Complies with JEDEC standard:
– JESD8-7 (1.65 V to 1.95 V)
– JESD8-5 (2.3 V to 2.7 V)
– JESD8B/JESD36 (2.7 V to 3.6 V).
• ±24 mA output drive (VCC = 3.0 V)
CMOS low power consumption
Latch-up performance exceeds 250 mA
Direct interface with TTL levels
Inputs accept voltages up to 5 V
Multiple package options
ESD protection:
– HBM EIA/JESD22-A114-B exceeds 2000 V
– MM EIA/JESD22-A115-A exceeds 200 V.
Specified from 40 °C to +85 °C and 40 °C to +125 °C.
DESCRIPTION
The 74LVC1G126 is a high-performance, low-power,
low-voltage, Si-gate CMOS device, superior to most
advanced CMOS compatible TTL families.
The input can be driven from either 3.3 V or 5 V devices.
This feature allows the use of this device in a mixed
3.3 V and 5 V environment.
This device is fully specified for partial power-down
applications using Ioff. The Ioff circuitry disables the output,
preventing the damaging backflow current through the
device when it is powered down.
The 74LVC1G126 provides one non-inverting buffer/line
driver with 3-state output. The 3-state output is controlled
by the output enable input (OE). A low level at pin OE
causes the output to assume a high-impedance
OFF-state.
QUICK REFERENCE DATA
GND = 0 V; Tamb = 25 °C; tr = tf 2.5 ns.
SYMBOL
PARAMETER
tPHL/tPLH
propagation delay input A to output Y
CI input capacitance
CPD power dissipation capacitance
CONDITIONS
VCC = 1.8 V; CL = 30 pF; RL = 1 k
VCC = 2.5 V; CL = 30 pF; RL = 500
VCC = 2.7 V; CL = 50 pF; RL = 500
VCC = 3.3 V; CL = 50 pF; RL = 500
VCC = 5.0 V; CL = 50 pF; RL = 500
output enabled; notes 1 and 2
output disabled; notes 1 and 2
TYPICAL UNIT
3.0 ns
2.1 ns
2.3 ns
2.0 ns
1.7 ns
5 pF
25 pF
6 pF
Notes
1. CPD is used to determine the dynamic power dissipation (PD in µW).
PD = CPD × VCC2 × fi × N + Σ(CL × VCC2 × fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in Volts;
N = total switching outputs;
Σ(CL × VCC2 × fo) = sum of the outputs.
2. The condition is VI = GND to VCC.
2004 Sep 21
2




PDF 파일 내의 페이지 : 총 17 페이지

제조업체: NXP Semiconductors

( nxp )

74LVC1G126 driver

데이터시트 다운로드
:

[ 74LVC1G126.PDF ]

[ 74LVC1G126 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


74LVC1G123

Single retriggerable monostable multivibrator - NXP Semiconductors



74LVC1G125

SINGLE BUFFER GATE - Diodes



74LVC1G125

Bus buffer/line driver - NXP Semiconductors



74LVC1G126

Bus buffer/line driver; 3-state - NXP Semiconductors



74LVC1G126

SINGLE BUFFER GATE - Diodes