파트넘버.co.kr HS-26CT31EH 데이터시트 PDF


HS-26CT31EH 반도체 회로 부품 판매점

Radiation Hardened Quad Differential Line Driver



Intersil 로고
Intersil
HS-26CT31EH 데이터시트, 핀배열, 회로
Radiation Hardened Quad Differential Line Drivers
HS-26CT31RH, HS-26CT31EH
The Intersil HS-26CT31RH, HS-26CT31EH are quad differential
line drivers designed for digital data transmission over
balanced lines and meet the requirements of EIA standard
RS-422. Radiation hardened CMOS processing assures low
power consumption, high speed, and reliable operation in the
most severe radiation environments.
The HS-26CT31RH, HS-26CT31EH accept TTL signal levels and
convert them to RS-422 compatible outputs. These circuits use
special outputs that enable the drivers to power down without
loading down the bus. Enable and disable pins allow several
devices to be connected to the same data source and
addressed independently.
Specifications
Specifications for Rad Hard QML devices are controlled by the
Defense Logistics Agency Land and Maritime (DLA). The SMD
numbers listed here must be used when ordering.
Detailed Electrical Specifications for these devices are
contained in SMD 5962-95632.
Features
• Electronically Screened to SMD #5962-95632
• QML Qualified Per MIL-PRF-38535 Requirements
• 1.2 Micron Radiation Hardened CMOS
• Total Dose Up to 300kRAD(Si)
• Latchup Free
• EIA RS-422 Compatible Outputs (Except for IOS)
• Operation with TTL Based on VIH = VDD/2
• High Impedance Outputs when Disabled or Powered Down
• Low Power Dissipation 2.75mW Standby (Max)
• Single 5V Supply
• Low Output Impedance 10or Less
• Full -55°C to +125°C Military Temperature Range
Applications
• Line Transmitter for MIL-STD-1553 Serial Data Bus
• Line Transmitter for RS422
Ordering Information
ORDERING
NUMBER (Note 1)
INTERNAL
MKT. NUMBER
PART MARKING
TEMP. RANGE
(°C)
PACKAGE
PKG.
DWG. #
5962F9563201QEC
HS1-26CT31RH-8
Q 5962F95 63201QEC
-55 to +125 16 LD SBDIP
D16.3
5962F9563201QXC
HS9-26CT31RH-8
Q 5962F95 63201QXC
-55 to +125 16 LD Flatpack
K16.A
5962F9563201VEC
HS1-26CT31RH-Q
Q 5962F95 63201VEC
-55 to +125 16 LD SBDIP
D16.3
5962F9563201VXC
HS9-26CT31RH-Q
Q 5962F95 63201VXC
-55 to +125 16 LD Flatpack
K16.A
HS1-26CT31RH/PROTO
HS1-26CT31RH/PROTO
HS1 - 26CT31RH /PROTO
-55 to +125 16 LD SBDIP
D16.3
HS9-26CT31RH/PROTO
HS9-26CT31RH/PROTO
HS9 - 26CT31RH /PROTO
-55 to +125 16 LD Flatpack
K16.A
5962F9563201V9A
HS0-26CT31RH-Q
-55 to +125 Die
5962F9563202VXC
HS9-26CT31EH-Q
Q 5962F95 63202VXC
-55 to +125 16 LD Flatpack
K16.A
HS0-26CLV31RH/SAMPLE HS0-26CLV31RH/SAMPLE
-55 to +125 Die
5962F9563201VYC
HS9G-26CT31RH-Q (Note 2)
Q 5962F95 63201VYC
-55 to +125 16 LD Flatpack
K16.A
HS9G-26CT31RH/PROTO
HS9G-26CT31RH/PROTO (Note 2) HS9G-26CT31RH/PROTO
-55 to +125 16 LD Flatpack
K16.A
NOTES:
1. These Intersil Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible with both
SnPb and Pb-free soldering operations.
2. The lid of these packages are connected to the ground pin of the device.
May 23, 2013
FN2929.5
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2000, 2008, 2012, 2013. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.


HS-26CT31EH 데이터시트, 핀배열, 회로
HS-26CT31RH, HS-26CT31EH
Pin Configurations
HS1-26CT31RH
(16 LD SBDIP)
CDIP2-T16
TOP VIEW
AIN 1
AO 2
AO 3
ENABLE 4
BO 5
BO 6
BIN 7
GND 8
16 VDD
15 DIN
14 DO
13 DO
12 ENABLE
11 CO
10 CO
9 CIN
AIN
AO
AO
ENABLE
BO
BO
BIN
GND
HS9-26CT31RH, HS-26CT31EH
(16 LD FLATPACK)
CDFP4-F16
TOP VIEW
1 16
2 15
3 14
4 13
5 12
6 11
7 10
89
VDD
DIN
DO
DO
ENABLE
CO
CO
CIN
Logic Diagram
ENABLE ENABLE DIN CIN BIN AIN
DO DO
CO CO
BO BO
AO AO
For additional products, see www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
2 FN2929.5
May 23, 2013




PDF 파일 내의 페이지 : 총 3 페이지

제조업체: Intersil

( intersil )

HS-26CT31EH driver

데이터시트 다운로드
:

[ HS-26CT31EH.PDF ]

[ HS-26CT31EH 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


HS-26CT31EH

Radiation Hardened Quad Differential Line Driver - Intersil