|
IK Semicon |
8CH Darlington Sink Driver
TECHNICAL DATA
IK62083/4
The IK62083~IK62084 are high-voltage, high-current
darlington drivers comprised of eight NPN darlington pairs.
All units feature integral clamp diodes for switching
indicative loads.
Application include relay, hammer, lamp and display (LED)
drivers.
Features
• Output current (single output)
500mA (Max)
• Output clamp diodes
• Inputs compatible with various types of logic
TYPE
IK62083N/DW
IK62084N/DW
INPUT BASE
RESISTOR
2.7kΩ
10.5kΩ
DESIGNATION
TTL, 5V CMOS
6~15V PMOS, CMOS
Pin Configuration
(top view)
IK62083N
IK62084N
DIP-18
IK62083DW
IK62084DW
SOP-18
TA = -40° ~ +85° C
for all packages.
IK62083
Block Schematics
IK62084
Note: The input and output parasitic diodes cannot be used as clamp diodes.
1
2011, February, Rev. 02
IK62083/4
Maximum Ratings
Ta =25°C
Parameter
Output Sustaining Voltage
Output Current
Input Voltage
Clamp Diode Reverse Voltage
Clamp Diode Forward Current
Power Dissipation
IK62083N
IK62083DW
Operating Temperature
Storage Temperature
Symbol
VCE(SUS)
IOUT
VIN
VR
IF
PD
Topr
Tstg
Limit Values
min.
max.
–0.5 50
500
– 0.5
30
50
500
1.47
0.96
-40 85
-55 150
Unit
V
mA/ch
V
V
mA
W
°C
°C
* Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device.
These are stress ratings only and functional operation of the device at these or any other conditions beyond those
indicated under “recommended operating conditions” is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
Recommended Operating Conditions
(Ta=-40~85°C)
Parameter
Symbol
Test Condition
Output Sustaining Voltage
Output Current
N
DW
Input Voltage
Input Voltage IK62083N/DW
(Output On) IK62084N/DW
Clamp Diode Reverse Voltage
Clamp Diode Forward Current
Power Dissipation
N
DW
VCE(SUS)
IOUT
VIN
VIN(ON)
VR
IF
PD
Tpw=25ms,Duty=10%,
8 Circuits
Tpw=25ms,Duty=50%,
8 Circuits
Tpw=25ms,Duty=10%,
8 Circuits
Tpw=25ms,Duty=50%,
8 Circuits
Limit Value
Min Typ Max
0 - 50
0 - 347
Unit
V
0 - 123
mA/ch
0 - 268
0 - 90
0 - 30 V
3.5 - 30
V
8 - 30
- - 50 V
- - 400 mA
- - 0.52
W
- - 0.4
2
2011, February, Rev. 02
|