|
Futaba |
AN-E-2311A
APPLICATION NOTE
VACUUM FLUORESCENT DISPLAY MODULE
CHARACTER DISPLAY MODULE
M204SD02FJ
GENERAL DESCRIPTION
Futaba Vacuum Fluorescent Display Module M204SD02FJ, with
Futaba VFD 204-SD-02GN display, produces 20 digits×4rows with 5×8
dot matrix.
Consisting of a VFD, one chip controller, DC-DC/AC converter, the
module can be operated by a parallel interface or a synchronous serial
interface, and only 5 voltage power source is required to operate the
module.
㩷
Free Datasheet http://www.Datasheet4U.com
! Important Safety Notice
Please read this note carefully before using the product.
Warning
• The module should be disconnected from the power supply before handling.
• The power supply should be switched off before connecting or disconnecting the
power or interface cables.
• The module contains electronic components that generate high voltages which may
cause an electrical shock when touched.
• Do not touch the electronic components of the module with any metal objects.
• The VFD used on the module is made of glass and should be handled with care.
When handling the VFD, it is recommended that cotton gloves be used.
• The module is equipped with a circuit protection fuse.
• Under no circumstances should the module be modified or repaired.
Any unauthorized modifications or repairs will invalidate the product warranty.
• The module should be abolished as the factory waste.
AN-E-2311A [Important Safety Notice]
Free Datasheet http://www.Datasheet4U.com
|