|
MA-COM |
XX1010-QT
Doubler
14.625-15.0/29.25-30 GHz
Features
Integrated Gain, Doubler and Driver Stages
+4.5 V Single Positive Bias
Integrated Bypassing Capacitor
+20 dBm Output Saturated Power
30 dBc Fundamental Suppression
On-Chip ESD Protection
100% RF, DC and Output Power Testing
Lead-Free 3 mm 16-Lead QFN Package
RoHS* Compliant and 260°C Reflow Compatible
Description
The XX1010-QT is a 14.625-15.0 / 29.25-30.0 GHz
GaAs MMIC doubler that integrates a gain stage,
passive doubler and driver amplifier onto a single
device. This device has a self-biased architecture
requiring a single positive supply (+4.5V) only and
integrated on-chip bypassing and DC blocking
capacitors eliminating the need for any external
components.
This device uses InGaAs pHEMT device technology,
and is based upon electron beam lithography to
ensure high repeatability and uniformity.
The XX1010-QT has integrated ESD structures for
protection and comes in a low cost 3 mm QFN
package.
The device is well suited for millimeter wave
Point-to-Point Radio, LMDS, SATCOM and VSAT
applications.
Ordering Information
Part Number
XX1010-QT-0G00
XX1010-QT-0G0T
XX1010-QT-EV1
Package
Bulk Quantity
1000 Piece Reel
Evaluation Board
Functional Block Diagram
Rev. V3
Pin Configuration1
Pin No.
Function
1,4,5,6,7,8
2,11
3
9,12,14,15,16
10
13
No Connection
Ground
RF Input
No Connection
RF Output
Vd
1. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
XX1010-QT
Doubler
14.625-15.0/29.25-30 GHz
Rev. V3
Electrical Specifications: Input Freq: 14.625-15.0 GHz, TA = 25°C, VD = +4.5 Volts
Parameter
Output Frequency Range
RF Input Power Level
Input Return Loss
Output Return Loss
Fundamental Suppression
Output Power
Supply Current
Units
GHz
dBm
dB
dB
dBc
dBm
mA
Min.
29.25
3.0
-
-
-
+18.0
-
Typ.
-
-
12
14
35
+20.0
200
Max.
30.0
10.0
-
-
-
+22.0
280
Absolute Maximum Ratings2,3
Parameter
Supply Voltage
Supply Current
Input Power
Storage Temperature
Operating Temperature
Junction Temperature4,5
Absolute Max.
+5.25 VDC
350 mA
12 dBm
-65 to +150 ºC
-40 to +85 ºC
+160 ºC
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM Technology Solutions does not recommend
sustained operation near these survivability limits.
4. Operating at nominal conditions with TJ ≤ 160°C will ensure
MTTF > 1 x 106 hours.
5. Junction Temperature (TJ) = TC + Өjc * ((V * I) - (POUT - PIN))
Typical thermal resistance (Өjc) = 65°C/W.
a) For TC = 25°C,
TJ = 101°C @ 4.5 V, 280 mA, PIN = 3 dBm, POUT = 20 dBm
b) For TC = 85°C,
TJ =156°C @ 4.5 V, 264 mA, PIN = 3 dBm, POUT = 20 dBm
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
class 1A devices.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
|