파트넘버.co.kr IN16C554A 데이터시트 PDF


IN16C554A 반도체 회로 부품 판매점

Quadruple UART



IK Semiconductor 로고
IK Semiconductor
IN16C554A 데이터시트, 핀배열, 회로
1. Description
IN16C554A
Quadruple UART
February 2009 REV 1.01
IN16C554A is an enhanced quadruple version of the 16C550UART (Universal
Asynchronous Receiver Transmitter). IN16C554A is in part an upgrade version of
IN16C554, as it is designed for 3.3V only and has AUTO-CTS, AUTO-RTS functions.
In IN16C554A, Each channel can be put into FIFO mode to relieve the CPU of excessive
software overhead. In this mode, internal FIFOs are activated and 16 bytes plus 3 bit of
error data per byte can be stored in both receive and transmit modes.
Each channel performs serial-to-parallel conversion on data characters received from a
peripheral device or a MODEM, and parallel-to-serial conversion on data characters
received from the CPU. The CPU can read the complete status of the UART at any time
during the functional operation. The Status information includes the type and condition of
the transfer operations being performed by the UART, as well as any error conditions
such as parity, overrun, framing, and break interrupt.
IN16C554A includes a programmable baud rate generator which is capable of dividing the
timing reference clock input by divisors of 1 to 216-1, and producing a 16x clock for driving
the internal transmitter logic. Provisions are also included to use this clock to drive the
receiver logic.IN16C554A has complete MODEM-control capability and an interrupt
system that can be programmed to the user’s requirements, minimizing the computing
required to handle the communication links. Moreover IN16C554A can select hardware
flow control. Hardware flow control significantly reduces software overhead and increases
system efficiency.
2. Features
In the FIFO mode, Each channel’s transmitter and receiver is buffered with 16-byte
FIFO to reduce the number of interrupts to CPU.
Adds or deletes standard asynchronous communication bits (start, stop, parity) to or
from the serial data.
Holding Register and Shift Register eliminate need for precise synchronization
between the CPU and serial data.
Independently controlled transmit, receive, line status and data interrupts.
Programmable Baud Rate Generators which allow division of any input reference
clock by 1 to 216-1 and generate an internal 16X clock.
Independent receiver clock input
Modem control functions (CTS#, RTS#, DSR#, DTR#, RI#, and DCD#).
Fully programmable serial interface characteristics.
- 5-, 6-, 7-, or 8-bit characters
- Even-, Odd-, or No-Parity bit
1-, 1.5-, 2-Stop bit generation. ( Like other general UARTs, IN16C554 checks only
one stop bit, no matter how many they are)
1


IN16C554A 데이터시트, 핀배열, 회로
IN16C554A
QUAD UART
JULY 2008 REV 0.99
False start bit detection
Generates or Detects Line Break
Internal diagnostic capabilities : Loopback controls for communications link fault
isolation.
Full prioritized interrupt system controls
Hardware (RTS#/CTS#) Flow Control
3. Ordering Information
Table 1: Ordering Information
Part Number
IN16C554A-TQ80
IN16C554A-PL68
IN16C554A-TQ64
Package
80-Pin TQFP
68-Pin PLCC
64-Pin TQFP
Operating Temperature Range
-20 to +85
-20 to +85
-20 to +85
Device Status
Active
Active
Active
2




PDF 파일 내의 페이지 : 총 30 페이지

제조업체: IK Semiconductor

( ik )

IN16C554A data

데이터시트 다운로드
:

[ IN16C554A.PDF ]

[ IN16C554A 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


IN16C554

TQ Enhanced Quadruple 16C550 UART - IK Semiconductor



IN16C554A

Quadruple UART - IK Semiconductor