파트넘버.co.kr OKL2-T-3-W12P-C 데이터시트 PDF


OKL2-T-3-W12P-C 반도체 회로 부품 판매점

Programmable Output 3-Amp iLGA SMT PoLs



Murata 로고
Murata
OKL2-T-3-W12P-C 데이터시트, 핀배열, 회로
www.murata-ps.com
OKL-T/3-W12 Series
Programmable Output 3-Amp iLGA SMT PoLs
Typical unit
FEATURES
iLGA inspectable Land Grid Array
4.5-14Vdc input voltage range
Programmable output voltage from 0.591-5.5Vdc
Drives up to 200 μF ceramic capacitive loads
High power conversion efficiency at 93%
Outstanding thermal derating performance
Short circuit and over current protection
On/Off control and Power Good signal
Optional Sequence/Tracking operation
(OKL2-T/3-W12 models)
Certified to UL/EN/IEC 60950-1 safety, 2nd Edition
RoHS-6 hazardous substance compliance
PRODUCT OVERVIEW
The OKL-T/3-W12 series are miniature
non-isolated Point-of-Load (PoL) DC/DC power
converters for embedded applications. Featuring
inspectable Land Grid Array (iLGA) format, the
OKL-T/3-W12 measures only 0.48 x 0.48 x 0.244
inches max. (12.2 x 12.2 x 6.2 mm max.).
The wide input range is 4.5 to 14 Volts DC.
The maximum output current is 3 Amps. Based
on fixed-frequency synchronous buck converter
switching topology, the high power conversion
efficient Point of Load (PoL) module features
programmable output voltage and On/Off control.
These converters also include under voltage lock
out (UVLO), output short circuit protection, and
over-current protections.
An optional sequence/tracking feature on
OKL2-T/3-W12 models allows power sequencing of
PoL’s. These units are certified to all standard UL/EN/
IEC 60950-1 safety certifications (2nd Edition) and
RoHS-6 hazardous substance compliance.
Connection Diagram
+Vin
F1
On/Off
Control
External
DC
Power
Source
Open = On
Closed = Off
(Positive
On/Off)
Controller
t4XJUDIJOH
t'JMUFST
t$VSSFOU4FOTF
Reference and
Error Amplifier
Common
Sequence/Tracking
(OKL2 Models)
Power Good
Figure 1. OKL-T/3-W12
Note: Murata Power Solutions strongly recommends an external input fuse, F1.
See specifications.
+Vout
Sense
Trim
Common
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
MDC_OKL-T/3-W12 Series.C01 Page 1 of 17


OKL2-T-3-W12P-C 데이터시트, 핀배열, 회로
OKL-T/3-W12 Series
Programmable Output 3-Amp iLGA SMT PoLs
Performance Specifications and Ordering Guide
ORDERING GUIDE
Model Number
Output
Input Package - Pinout P83
Vout
Iout (Amps, Power
R/N (mV p-p) Regulation (max.) Vin nom. Range Iin, no load Iin, full load
Efficiency
On/Off Seq/
Logic Track
Case C83
(Volts) max.) (Watts) Max. Line Load (Volts) (Volts) (mA) (Amps) Min. Typ.
inches (mm)
OKL-T/3-W12P-C 0.591-5.5 3 15.0 37 ±0.25% ±0.25% 12 4.5-14 20
1.34
91% 93% Pos.
no
0.48x0.48x0.244 max
12.2x12.2x6.2 max
OKL-T/3-W12P-C/S 0.591-5.5 3 15.0 37 ±0.25% ±0.25% 12 4.5-14 20
1.34
91% 93% Pos.
no
0.48x0.48x0.244 max
12.2x12.2x6.2 max
OKL-T/3-W12N-C 0.591-5.5 3 15.0 37 ±0.25% ±0.25% 12 4.5-14 20
1.34
91% 93% Neg.
no
0.48x0.48x0.244 max
12.2x12.2x6.2 max
OKL-T/3-W12N-C/S 0.591-5.5 3 15.0 37 ±0.25% ±0.25% 12 4.5-14 20
1.34
91% 93% Neg.
no
0.48x0.48x0.244 max
12.2x12.2x6.2 max
OKL2-T/3-W12P-C 0.591-5.5 3 15.0 37 ±0.25% ±0.25% 12 4.5-14 20
1.34
91% 93% Pos.
yes
0.48x0.48x0.244 max
12.2x12.2x6.2 max
OKL2-T/3-W12N-C 0.591-5.5 3 15.0 37 ±0.25% ±0.25% 12 4.5-14 20
1.34
91% 93% Neg.
yes
0.48x0.48x0.244 max
12.2x12.2x6.2 max
The output range is limited by Vin. See detailed specs.
All specifications are at nominal line voltage, Vout=nominal (5V for W12 models) and full load,
+25 deg.C. unless otherwise noted.
Output capacitors are 10 μF ceramic. Input cap is 22 μF. See detailed specifications.
I/O caps are necessary for our test equipment and may not be needed for your application.
Use adequate ground plane and copper thickness adjacent to the converter.
Ripple and Noise (R/N) and no-load input current are shown at Vout=1V. See specs for details.
PART NUMBER STRUCTURE
OK L 2 - T / 3 - W12 N - C / S
Non-isolated PoL
LGA Surface Mount
Sequence/tracking
Blank = Not installed
2 = Installed
Trimmable Output
Voltage Range
0.591-5.5Vdc
Maximum Rated Output
Current in Amps
Packaging
Blank = standard (400 units per reel)
S = small (100 units per reel)
RoHS Hazardous
Substance Compliance
C = RoHS-6 (does not claim EU RoHS exemption
7b–lead in solder)
On/Off Logic
P = Positive Logic
N = Negative Logic
Input Voltage Range
4.5-14Vdc
Product Label
Because of the small size of these products, the product label contains a
character-reduced code to indicate the model number and manufacturing date
code. Not all items on the label are always used. Please note that the label
differs from the product photograph. Here is the layout of the label:
The label contains three rows of information:
Model Number
OKL-T/3-W12P-C
OKL-T/3-W12P-C/S
OKL-T/3-W12N-C
OKL-T/3-W12N-C/S
OKL2-T/3-W12P-C
OKL2-T/3-W12N-C
Product Code
L01103
L00103
L21103
L20103
Mfg.
XXXXXX
Product code
date YMDX Rev. Revision level
code
Figure 2. Label Artwork Layout
First row – Murata Power Solutions logo
Second row – Model number product code (see table)
Third row – Manufacturing date code and revision level
www.murata-ps.com/support
The manufacturing date code is four characters:
First character – Last digit of manufacturing year, example 2009
Second character – Month code (1 through 9 = Jan-Sep;
O, N, D = Oct, Nov, Dec)
Third character – Day code (1 through 9 = 1 to 9, 10 = 0 and
11 through 31 = A through Z)
Fourth character – Manufacturing information
MDC_OKL-T/3-W12 Series.C01 Page 2 of 17




PDF 파일 내의 페이지 : 총 17 페이지

제조업체: Murata

( murata )

OKL2-T-3-W12P-C data

데이터시트 다운로드
:

[ OKL2-T-3-W12P-C.PDF ]

[ OKL2-T-3-W12P-C 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


OKL2-T-3-W12P-C

Programmable Output 3-Amp iLGA SMT PoLs - Murata