|
SMC |
CAT.E272-
Single rod type
Series MB1
Double rod type
Series MB1W
Non-rotating rod type
Series MB1K
Square Tube Type
Air Cylinder
Series MB1
ø32, ø40, ø50, ø63, ø80, ø100
Employs a square tube with enclosed tie-rods
Series MB1
Double Acting Single Rod Type
MB1W
Double Acting Double Rod Type
Improved cushion capacity
Piston rod lurching, due to cracking pressure at
start up, has been eliminated by means of a floating
seal mechanism.
Increased kinetic
energy absorption
The absorption of kintectic energy has
been increased by nearly 30%
compared to the CA1 series, through
increased cushion volume and the
use of a new cushion seal. In addition,
the life of the cushion seal is
approximately 5 times longer.
Compact and light weight
The height and width of the covers has been
reduced by nearly 10%, and in an addition, die
casting of the covers has reduced the weight by
10 to 25% compared to the CA1 series.
Improved mounting accuracy
High precision has been achieved in the cylinder unit and the
mounting brackets. Improved mounting accuracy simplifies the
mounting process and also extends cylinder life.
Piston rod sagging reduced
Sagging of the piston rod has been reduced by
increasing the precision of the bushing and piston rod,
and reducing their clearances.
Feature 1
|