|
|
PDF SX1502 Data sheet ( Hoja de datos )
| Número de pieza | SX1502 | |
| Descripción | 8 Channel Low Voltage GPIO | |
| Fabricantes | Semtech Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SX1502 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
WIRELESS & SENSING
SX1501/SX1502/SX1503
4/8/16 Channel Low Voltage GPIO
SX1501/SX1502/SX1503
4/8/16 Channel Low Voltage GPIO with NINT and NRESET
GENERAL DESCRIPTION
The SX1501, SX1502 and SX1503 are complete ultra
low voltage General Purpose parallel Input/Output
(GPIO) expanders ideal for low power handheld
battery powered equipment. They allow easy serial
expansion of I/O through a standard I2C interface.
GPIO devices can provide additional control and
monitoring when the microcontroller or chipset has
insufficient I/O ports, or in systems where serial
communication and control from a remote location is
advantageous.
These devices can also act as a level shifter to
connect a microcontroller running at one voltage level
to a component running at a different voltage level.
The core is operating as low as 1.2V while the I/O
banks can operate between 1.2V and 5.5V
independent of the core voltage and each other.
Each GPIO is programmable via 8-bit configuration
registers. Data registers, direction registers, pull-
up/pull-down registers, interrupt mask registers and
interrupt registers allow the system master to
program and configure 4 or 8 or 16-GPIOs using a
standard 400kHz I2C interface.
The SX1501, SX1502 and SX1503 offer a unique
fully programmable logic functions like a PLD to give
more flexibility and reduce external logic gates used
for standard applications.
The SX1501, SX1502 and SX1503 have the ability to
generate mask-programmable interrupts based on
falling/rising edge of any of its GPIO lines. A
dedicated pin indicates to a host controller that a
state change occurred in one or more of the GPIO
lines.
The SX1501, SX1502 and SX1503 each come in a
small QFN-UT-20/28 package. All devices are rated
from -40°C to +85°C temperature range.
ORDERING INFORMATION
Part Number I/O Channels Package
SX1501I087TRT 4 QFN-UT-20
SX1502I087TRT 8 QFN-UT-20
SX1503I091TRT 16 QFN-UT-28
SX1502EVK(1)
8 Evaluation Kit
(1)SX1502I087TRT based, unique evaluation kit for the three
parts.
KEY PRODUCT FEATURES
• 4/8/16 channel of I/Os
True bi-directional style I/O
Programmable Pull-up/Pull-down
Push/Pull outputs
• 1.2V to 5.5V independent operating voltage for
all supply rails (VDDM, VCC1, VCC2)
• 5.5V compatible I/Os, up to 24mA output sink
(no total sink current limit)
• Fully programmable logic functions (PLD)
• 400kHz 2-wire I2C compatible slave interface
• Open drain active low interrupt output (NINT)
Bit maskable
Programmable edge sensitivity
• Power-On Reset and reset input (NRESET)
• Ultra low current consumption of typ. 1uA
• -40°C to +85°C operating temperature range
• Ultra-Thin 3x3mm QFN-UT-20 package
(SX1501/SX1502)
• Ultra-Thin 4x4mm QFN-UT-28 package
(SX1503)
TYPICAL APPLICATIONS
• Cell phones, PDAs, MP3 players
• Digital camera
• Portable multimedia player
• Notebooks
• GPS Units
• Industrial, ATE
• Any battery powered equipment
Rev 11 – 16th May 2012
1
www.semtech.com
1 page  
WIRELESS & SENSING
SX1501/SX1502/SX1503
4/8/16 Channel Low Voltage GPIO
1.2 SX1502 8-channel GPIO
Pin Symbol Type Description
A: Analog
D: Digital
I: Input
O: Output
P: Power
1 NRESET
2 SDA
3 NC1
4 SCL
5 I/O[0]
6 I/O[1]
7 VCC1
8 GND
9 I/O[2]
10 I/O[3]
11 NINT
12 ADDR
13 NC2
14 VDDM
15 I/O[4]
16 I/O[5]
17 VCC2
18 GND
19 I/O[6]
20 I/O[7]
DIO
DIO
-
DI
DIO (*1)
DIO (*1)
P
P
DIO (*1)
DIO (*1)
DO
DI
-
P
DIO (*1)
DIO (*1)
P
P
DIO (*1)
DIO (*1)
Active low reset
I2C serial data line
Leave open, not connected
I2C serial clock line
I/O[0], at power-on configured as an input
I/O[1], at power-on configured as an input
Supply voltage for Bank A I/O[0-3]
Ground Pin
I/O[2], at power-on configured as an input
High sink I/O.
I/O[3], at power-on configured as an input
High sink I/O.
Active low interrupt output
Address input, connect to VDDM or GND
Leave open, not connected
Main supply voltage
I/O[4], at power-on configured as an input
I/O[5], at power-on configured as an input
Supply voltage for Bank B I/O[4-7]
Ground Pin
I/O[6], at power-on configured as an input
I/O[7], at power-on configured as an input
(*1) This pin is programmable through the I2C interface
Table 2 – SX1502 Pin Description
NRESET
SDA
NC1
SCL
I/O[0]
GND
(PAD)
I/O[4]
VDDM
NC2
ADDR
NINT
Figure 2 – SX1502 QFN-UT-20 Pinout
Rev 11 – 16th May 2012
5
www.semtech.com
5 Page 
WIRELESS & SENSING
SX1501/SX1502/SX1503
4/8/16 Channel Low Voltage GPIO
VOL vs IOL (VCC1,2=5.5V, High Sink IOs)
0.15
0.1
VOL (V)
0.05
Tamb*
0
0
5
*
Doesn’t vary significantly with temperature
10
15 20
IOL (mA)
3.3 VOH vs. IOH
VOH vs IOH (VCC1,2=1.2V)
25
30
1.2
1.18
VOH (V1.)16
1.14
1.12
1.1
0 0.2
*
Doesn’t vary significantly with temperature
0.4
0.6 0.8
IOH (mA)
1
VOH vs IOH (VCC1,2=5.5V)
Tamb*
5.5
5.4
VOH (V5).3
5.2
5.1
5
0
* Doesn’t vary significantly with temperature
Rev 11 – 16th May 2012
10
IOH (mA)
11
Tamb*
20
www.semtech.com
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet SX1502.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SX150 | Pressure Sensor |  Sensym |
| SX1501 | 4 Channel Low Voltage GPIO | Semtech Corporation |
| SX1502 | 8 Channel Low Voltage GPIO | Semtech Corporation |
| SX1503 | 16 Channel Low Voltage GPIO | Semtech Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |