|
|
PDF HT07W12-120 Data sheet ( Hoja de datos )
| Número de pieza | HT07W12-120 | |
| Descripción | TFT-LCD | |
| Fabricantes | BOE | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HT07W12-120 (archivo pdf) en la parte inferior de esta página. Total 23 Páginas | ||
|
No Preview Available !
PROPRIETARY NOTE
THIS SPECIFICATION IS THE PROPERTY OF BOEHYDIS AND SHALL NOT BE
REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOEHYDIS
AND MUST BE RETURNED TO HYDIS UPON ITS REQUEST.
TITLE : HT07W12-120 Preliminary Product
Specification
Rev. P0
BOE-HYDIS TECHNOLOGY CO., LTD.
SPEC. NUMBER
RASR 055-3
PRODUCT GROUP
TFT-LCD PRODUCT
REV. ISSUE DATE
P0 2003.03
PAGE
1 OF 23
A4 (210 X 297)
1 page  
PRODUCT GROUP
TFT-LCD PRODUCT
REV.
P0
ISSUE DATE
2003.03
1.4 General Specifications
The followings are general specifications at the model HT07W12-120.
Table 1. General Specifiations
Parameter
Specification
Display Mode
Normally white
Supply Voltage
Drive System
VCC1(+12.0V), VCC2(+12.0V)
VCOM(9V), VDD(5V), VGH(18V),
VGL(-15V), VDL(-10V)
H-Line Inversion
Number of pixels
480(H)*234(V)
Pixel Pitch
0.321(H)*0.372(V)
Pixel Arrangement
RGB Vertical stripe
Display Colors
Full
154.080*87.048
Effective Viewing Area
7.0 (Diagonal)
Sync Signal
Hor./Ver. Sync Output for RGB
Brightness
450 Typ.(Note2) / 220 Typ.(Note3)
Outline Dimension
167.0*102.0 (typ)
Thickness
15.5 max
Back-light
1CCFL(Note1), Side-light type,’ ’ type
Weight
250typ.
Surface Treatment
Anti-Glare and Hard Coating
Note: 1. CCFL (Cold Cathode Fluorescent Lamp)
Note: 2. Non-Operating Condition
Note: 3. Operating Condition
Unit
Volts
Volts
Pixels
mm
Colors
mm
Inch
Cd / m2
Mm
mm
g
Remarks
V/B Input
S/B Input
TTL Level
SPEC. NUMBER
RASR 057-1
SPEC. TITLE
HT07W12-120 Preliminary Product Specification
PAGE
5 OF 23
A4(210 X 297)
5 Page 
PRODUCT GROUP
TFT-LCD PRODUCT
REV.
P0
ISSUE DATE
2003.03
2. Average luminance of white is defined as arithmetic mean of one point across the LCD surface.
Luminance shall be measured with all pixels in the view field set first to white. This measurement
shall be taken at the locations shown in FIGURE 2 for a total of the measurements per display.
3. The color chromaticity coordinates specified in Table 5. shall be calculated from the spectral data
measured with all pixels first in red, green, blue, and white measurements shall be made at the center
of the panel.
4. Contrast measurements shall be made at viewing angle of θ= 0° and at the center of the LCD
surface. See FIGURE 1 (located in Appendix). Luminance shall be measured with all pixels in the
view field set first to white, then to the dark (black) state. Luminance Contrast Ratio (CR) is defined
mathematically as : CR = Luminance when displaying a white raster / Luminance when displaying a
black raster.
5. The white luminance uniformity on LCD surface is then expressed as : ∆Y = Maximum luminance
of five points / Minimum luminance of five points.
6. The electro-optical response time measurements shall be made as shown in FIGURE 3 (shown in
Appendix) by switching the “data” input signal ON and OFF. The times needed for the luminance to
change from 10% to 90% is Td and 90% to 10% is Tr.
SPEC. NUMBER
RASR 057-1
SPEC. TITLE
HT07W12-120 Preliminary Product Specification
PAGE
11 OF 23
A4(210 X 297)
11 Page | ||
| Páginas | Total 23 Páginas | |
| PDF Descargar | [ Datasheet HT07W12-120.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HT07W12-120 | TFT-LCD | BOE |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |