|
|
PDF BA101WS1-100 Data sheet ( Hoja de datos )
| Número de pieza | BA101WS1-100 | |
| Descripción | TFT LCD | |
| Fabricantes | BOE | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de BA101WS1-100 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
SPEC. NUMBER
PROPRIETARY NOTE
THIS SPECIFICATION IS THE PROPERTY OF BOE HF AND SHALL NOT BE
REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOE HF AND
MUST BE RETURNED TO BOE HF UPON ITS REQUEST
PRODUCT GROUP Rev.
TFT-LCD
P0
ISSUE DATE
2012.2.6
PAGE
1 OF 36
BA101WS1-100
Preliminary Product Specification P0
wwwwww..jjxxllccdd..ccoomm
HEFEI BOE OPTOELECTRONICS TECHNOLOGY
R2010-6053-O(1/3)
A4(210 X 297)
1 page  
SPEC. NUMBER
1.3 Application
PRODUCT GROUP
REV
TFT- LCD PRODUCT
P0
SPEC. TITLE
BA101WS1-100 Preliminary Product Specification
ISSUE DATE
2012.2.6
PAGE
5 OF 36
z Notebook PC (Wide type)
1.4 General Specification
The followings are general specifications at the model BA101WS1-100. (listed in Table 1.)
<Table 1. General Specifications>
Parameter
Specification
Unit Remarks
Active area
222.72(H) ×125.28(V)
mm
Number of pixels
1024 (H) ×600 (V)
pixels
Pixel pitch
wwwwww..jjxxllccdd..ccoommPixel arrangement
0.2175 (H) ×0.2088 (V)
RGB Vertical stripe
mm
Display colors
262K
colors
Display mode
Normally White
Dimensional outline 245±0.5 (H) ×146.5±0.5 (V) ×3.6 (D:max)
mm
Weight
170(max)
g
Surface treatment Glare / Hardness 3H
Back-light
Up edge side, 1-LED Lighting Bar type
Power consumption
PD : 0.8(max)
PBL : 1.8(max)
Ptotal : 2.6(max)
W
W
W
R2010-6053-O(3/3)
A4(210 X 297)
5 Page 
SPEC. NUMBER
PRODUCT GROUP
REV
TFT- LCD PRODUCT
P0
SPEC. TITLE
BA101WS1-100 Preliminary Product Specification
ISSUE DATE
2012.2.6
PAGE
11 OF 36
Note :
1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing are
determined for the horizontal or 3, 9 o’clock direction and the vertical or 6, 12 o’clock
direction with respect to the optical axis which is normal to the LCD surface.
2. Contrast measurements shall be made at viewing angle of θ= 0° and at the center of the LCD
surface. Luminance shall be measured with all pixels in the view field set first to white, then
to the dark (black) state. (See FIGURE 1 shown in Appendix) Luminance Contrast Ratio (CR)
is defined mathematically.
Luminance when displaying a white raster
Luminance when displaying a black raster
3. Center Luminance of white is defined as the LCD surface. Luminance shall be measured with
all pixels in the view field set first to white. This measurement shall be taken at the locations
wwwwww..jjxxllccdd..ccoommshown in FIGURE 2 for a total of the measurements per display.
4. The White luminance uniformity on LCD surface is then expressed as :
ΔY5 = ( Minimum Luminance of 5 points / Maximum Luminance of 5 points ) * 100
ΔY13= ( Minimum Luminance of 13 points / Maximum Luminance of 13 points ) * 100
(See FIGURE 2 and FIGURE 3 shown in Appendix).
5. The color chromaticity coordinates specified in Table 4. shall be calculated from the spectral
data measured with all pixels first in red, green, blue and white. Measurements shall be made
at the center of the panel.
6. The electro-optical response time measurements shall be made as FIGURE 4 shown in
Appendix by switching the “data” input signal ON and OFF. The times needed for the
luminance to change from 10% to 90% is Td, and 90% to 10% is Tr.
R2010-6053-O(3/3)
A4(210 X 297)
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet BA101WS1-100.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| BA101WS1-100 | TFT LCD | BOE |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |