DataSheet.es    


PDF B160HW02-V0 Data sheet ( Hoja de datos )

Número de pieza B160HW02-V0
Descripción FHD 16:9 Color TFT-LCD
Fabricantes AUO 
Logotipo AUO Logotipo



Hay una vista previa y un enlace de descarga de B160HW02-V0 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! B160HW02-V0 Hoja de datos, Descripción, Manual

Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
( ) Preliminary Specifications
( V ) Final Specifications
Module
Model Name
16FHD 16:9 Color TFT-LCD
with LED Backlight design
B160HW02 V0 (HW Code: 1A)
Customer
Date
Approved by
Date
Kuei Sheng Tseng
2010/6/30
Checked &
Approved by
Date
Prepared by
Date
Michael WJ Sun
2010/6/30
Note: This Specification is subject to change
without notice.
NBBU Marketing Division
AU Optronics corporation
B160HW02 V0 Document Version : 1.2
1 of 41
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

1 page




B160HW02-V0 pdf
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input
connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration
or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on
hard surface.
6) Since PMOS is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate
nor tilt the Interface Connector of the TFT Module.
11)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be
damaged.
12)Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13)Disconnecting power supply before handling LCD modules, it can prevent electric shock,
DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT
module that a LED light bar build in as a light source of back light unit. It can prevent
electrostatic breakdown.
B160HW02 V0 Document Version : 1.2
5 of 41
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

5 Page





B160HW02-V0 arduino
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Note 8. Definition of viewing angle
Viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180° horizontal and
180° vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as follows; 90°
(θ) horizontal left and right and 90° (Φ) vertical, high (up) and low (down). The measurement direction is
typically perpendicular to the display surface with the screen rotated about its center to develop the desired
measurement viewing angle.
Note 9. (1)Image sticking in white and a black boundary part of the checkers pattern is allowed.
(2)Test pattern and method
B160HW02 V0 Document Version : 1.2
11 of 41
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet B160HW02-V0.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
B160HW02-V0FHD 16:9 Color TFT-LCDAUO
AUO

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar