|
Kyocera |
SPEC
Spec No. TQ3C-8EAS0-E1DAM50-00
Date January 22, 2008
TYPE : KG057QVLCF-G000
< 5.7 inch QVGA transmissive monochrome STN with LED
backlight and constant current circuit for LED backlight>
CONTENTS
1. Application
2. Construction and outline
3. Mechanical specifications
4. Absolute maximum ratings
5. Electrical characteristics
6. Optical characteristics
7. Circuit block diagram
8. Interface signals
9. Interface timing chart
10. Input timing characteristics
11. Supply voltage sequence condition
12. Backlight characteristics
13. Lot number identification
14. Warranty
15. Precautions for use
16. Reliability test data
17. Outline drawing
Original
Issue Date
KYOCERA CORPORATION
KAGOSHIMA HAYATO PLANT
LCD DIVISION
This specification is subject to change without notice.
Consult Kyocera before ordering.
Designed by: Engineering dept.
Confirmed by: QA dept.
Prepared
Checked
Approved
Checked
Approved
January 22, 2008
Spec No.
TQ3C-8EAS0-E1DAM50-00
Part No.
KG057QVLCF-G000
Page
-
Warning
1. This Kyocera LCD module has been specifically designed for use only in
electronic devices and industrial machines in the area of audio control,
office automation, industrial control home appliances, etc. The module
should not be used in applications where the highest level of safety and
reliability are required and module failure or malfunction of such module
results in physical harm or loss of life, as well as enormous damage or loss.
Such fields of applications include, without limitation, medical, aerospace,
communications infrastructure, atomic energy control. Kyocera expressly
disclaims any and all liability resulting in any way to the use of the module
in such applications.
2. Customer agrees to indemnity, defend and hold Kyocera harmless
from and against any and all actions, claims, damages, liabilities,
awards, costs, and expenses, including legal expenses, resulting from or
arising out of Customer's use, or sale for use, or Kyocera modules in
applications.
Caution
1. Kyocera shall have the right, which Customer hereby acknowledges, to
immediately scrap or destroy tooling for Kyocera modules for which no
Purchase Orders have been received from the Customer in a two-year period.
|